Digital Socket Fusion Welder for PPR is a product in the pipe fittings family for fluid conduction. 1 size published with per-variant price and availability. Fusion connection. Price from $ 499.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-241715-01 | 20 mm - 63 mm | $ 499.600 * | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping. Sizes marked with * show the base reference price.
| Family | Pipe fittings |
| Connection | Fusion |
| Availability | In stock |
The socket fusion welder (thermofusion machine) is the electric tool that joins thermoplastic pipe and fittings by heat fusion: a heating plate with sockets warms the outside of the pipe and the inside of the fitting at the same time until both melt and are pushed together, forming a permanent joint with no threads or cement. This Digital Socket Fusion Welder for PPR covers diameters from 20 to 63 mm with digital temperature control and ships with 6 non-stick sockets (20, 25, 32, 40, 50 and 63 mm), the sizes used in PPR hot- and cold-water networks.
The process reference is DVS 2207-11 (heated-tool welding of polypropylene pipes and fittings), which sets the heated-tool temperature at 260 ± 10 °C for PP socket fusion. The heater of this unit adjusts between 240 and 300 °C, so it covers that working point with adjustment margin.
| Specification | Value |
|---|---|
| Diameter range | 20 mm to 63 mm (1/2" to 2" nominal in PPR) |
| Sockets included | 20, 25, 32, 40, 50 and 63 mm, with non-stick coating |
| Heater temperature | 240 °C – 300 °C, adjustable with digital indicator |
| Power supply | 210 V – 230 V, 50–60 Hz |
| Ambient operating temperature | -20 °C to +50 °C |
| Operating relative humidity | 45 % – 95 % |
| Insulation resistance | ≥ 1 MΩ |
| Leakage current | ≤ 5 mA |
| Sale | Per unit — $499,600 COP, in stock |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Values taken from the product data sheet. The rated power in watts of this reference is not published on the data sheet and is confirmed when quoting.
Sold per unit with dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Quote via WhatsApp stating quantity and delivery city.
$499,600 COP per unit, in stock, with the 6 sockets from 20 to 63 mm included. Shipping is quoted by city — request your formal quote via WhatsApp.
At 260 ± 10 °C at the heated tool, per DVS 2207-11 for polypropylene socket fusion. The heater of this unit adjusts between 240 and 300 °C, with a digital indicator to set the working point.
From 20 to 63 mm, with the 6 included sockets: 20, 25, 32, 40, 50 and 63 mm. It covers the usual sizes of PPR hot- and cold-water networks (1/2" to 2" nominal).
The product sheet declares it suitable for PPR, PE and PVC thermoplastic pipe depending on material and process compatibility. Note that pressure PVC is normally joined with solvent cement, not by heat fusion — confirm your project's joining system before buying.
The rated power of this reference is not published on its data sheet and is confirmed when quoting. As a market reference, manual units for 20-63 mm are usually offered between 800 W and 1,500 W.
Socket fusion heats pipe and fitting on the welder's sockets before joining them; electrofusion uses fittings with a built-in electric resistance that melts the joint through a control unit. For PPR networks from 20 to 63 mm the standard method is socket fusion.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
