Polypropylene Fusion Tee is a product in the pipe fittings family for fluid conduction in polypropylene. 18 sizes published with per-variant price and availability. Fusion connection. Price from $ 1.345 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59282-01 | 20 mm - VERDE | $ 1.345 | In stock | ||
| VT-59282-02 | 20 mm - AZUL | $ 1.345 | In stock | ||
| VT-59282-03 | 25 mm - VERDE | $ 2.101 | In stock | ||
| VT-59282-04 | 25 mm - AZUL | $ 2.101 | In stock | ||
| VT-59282-05 | 32 mm - VERDE | $ 4.034 | In stock | ||
| VT-59282-06 | 32 mm - AZUL | $ 4.034 | In stock | ||
| VT-59282-07 | 40 mm - VERDE | $ 7.563 | In stock | ||
| VT-59282-08 | 40 mm - AZUL | $ 7.563 | In stock | ||
| VT-59282-09 | 50 mm - VERDE | $ 11.008 | In stock | ||
| VT-59282-10 | 50 mm - AZUL | $ 11.008 | In stock | ||
| VT-59282-11 | 63 mm - VERDE | $ 21.933 | In stock | ||
| VT-59282-12 | 63 mm - AZUL | $ 21.933 | In stock | ||
| VT-59282-13 | 75 mm - VERDE | $ 1.345 * | In stock | ||
| VT-59282-14 | 75 mm - AZUL | $ 38.319 | In stock | ||
| VT-59282-15 | 90 mm - VERDE | $ 1.345 * | In stock | ||
| VT-59282-16 | 90 mm - AZUL | $ 63.277 | In stock | ||
| VT-59282-17 | 110 mm - VERDE | $ 1.345 * | In stock | ||
| VT-59282-18 | 110 mm - AZUL | $ 148.235 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping. Sizes marked with * show the base reference price.
| Family | Pipe fittings |
| Material | Polipropileno |
| Connection | Fusion |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The polypropylene fusion tee branches a line in PP-R hot and cold water networks by socket heat fusion, which melts pipe and fitting into a monolithic joint with no thread or cement. Fittings for these systems are specified per ISO 15874-3:2013 (validity confirmed 2023) and pipes per ISO 15874-2:2013. The lot covers 20 to 110 mm in green and blue lines.
| Feature | Specification |
|---|---|
| Fittings standard | ISO 15874-3:2013 — plastics piping systems in polypropylene for hot and cold water, part 3: fittings (validity confirmed 2023) |
| System pipe standard | ISO 15874-2:2013 — part 2: pipes |
| Joint | Socket heat fusion with a heating die; monolithic, non-demountable joint |
| Service | Hot and cold water; application class and pressure (PN / S series) of the lot per manufacturer — confirm when quoting |
| Lot colors | Green and blue — manufacturer’s commercial coding, not a standard designation |
| Material | Polypropylene; lot resin type (PP-R) confirmed when quoting |
| Lot sizes | 20, 25, 32, 40, 50, 63, 75, 90, 110 mm (each in green and blue) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Quote the polypropylene fusion tee via WhatsApp stating size, line color and quantity to confirm availability.
Fittings of polypropylene hot and cold water systems are specified per ISO 15874-3:2013, whose validity was confirmed in 2023, and pipes per ISO 15874-2:2013; the lot seal is confirmed when quoting.
Yes: the scope of ISO 15874 covers hot and cold water installations; the application class and allowable pressure of each reference depend on the manufacturer and are confirmed when quoting.
The color is the manufacturer’s commercial coding to distinguish lines, not a standard designation; the technical specification of each lot color is confirmed when quoting.
By socket fusion: square cut, cleaning, heating pipe and fitting in the die, insertion to the marked depth without turning, and holding during initial cooling.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
