PVC Pressure Solvent-Weld Tee is a product in the pipe fittings family for fluid conduction in PVC. 10 sizes published with per-variant price and availability. Weld connection. Price from $ 900 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58584-01 | 1/2" | $ 900 | In stock | ||
| VT-58584-02 | 3/4" | $ 900 | In stock | ||
| VT-58584-03 | 1" | $ 900 | In stock | ||
| VT-58584-04 | 1-1/4" | $ 900 | In stock | ||
| VT-58584-05 | 1-1/2" | $ 900 | In stock | ||
| VT-58584-06 | 2" | $ 900 | In stock | ||
| VT-58584-07 | 2-1/2" | $ 900 | In stock | ||
| VT-58584-08 | 3" | $ 900 | In stock | ||
| VT-58584-09 | 4" | $ 900 | In stock | ||
| VT-58584-10 | 6" (Bajo pedido) | $ 900 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Pvc |
| Connection | Weld |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
PVC Pressure Solvent-Weld Tee is a PVC pressure tee for forming a branch bonded with solvent cement in hydraulic networks. At TECTUL it is offered in PVC pressure, selected by actual catalog size and focused on industrial buyers in Colombia. This product differs within the pipe fittings family by its connection, material and function: it is not automatically interchangeable with fittings of another schedule, end type or geometry. It differs from the sanitary tee by its use in pressure conveyance and not gravity drainage. To specify it correctly, define diameter, joint type, fluid, operating temperature, installation environment and maintenance needs. When the project mentions standards such as ASME, ASTM, MSS, ISO, NTC or gas and sanitary codes, the purchase must be tied to the technical data sheet and the approved installation procedure.
| Available size | Sales unit |
|---|---|
| 1/2" | Sold by Units (Unit) |
| 3/4" | Sold by Units (Unit) |
| 1" | Sold by Units (Unit) |
| 1-1/4" | Sold by Units (Unit) |
| 1-1/2" | Sold by Units (Unit) |
| 2" | Sold by Units (Unit) |
| 2-1/2" | Sold by Units (Unit) |
| 3" | Sold by Units (Unit) |
| 4" | Sold by Units (Unit) |
| 6" (On request) | Sold by Units (Unit) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp at TECTUL indicating size, quantity, delivery city and service conditions to confirm availability and an equivalent technical alternative if applicable.
The price depends on size, availability and quantity. At TECTUL we quote per unit with the actual product specification and dispatch to your city.
PVC Pressure Solvent-Weld Tee differs by its material, connection or main function. A sanitary PVC tee may serve another installation condition, so the end type and use should be validated before purchase.
It is installed by aligning the pipe, preparing the joint surfaces and applying the corresponding procedure: threading, welding, heat fusion, solvent cement, flange or grooved coupling depending on the product.
The sizes published on this page are taken from TECTUL's actual lot; if you need a combination not listed, availability is validated on request.
It depends on the material, seals, temperature, design pressure and project regulations. Before installation, confirm compatibility with water, air, gas, steam, chemicals or another specific fluid.
Yes. We dispatch to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and logistics conditions.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
