Dresser Nut-Type Coupling is a product in the pipe fittings family for fluid conduction. 4 sizes published with per-variant price and availability. Price from $ 50.300 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-178902-01 | 1" | $ 50.300 | In stock | ||
| VT-178902-02 | 1-1/4" | $ 50.300 | In stock | ||
| VT-178902-03 | 1-1/2" | $ 50.300 | In stock | ||
| VT-178902-04 | 2" | $ 50.300 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Connection | Other |
| Availability | In stock |
The Dresser nut-type coupling is a mechanical coupling for splicing or repairing pipe when quick installation is needed without threading new ends. It is used in maintenance of water, air, or industrial service networks compatible with its gaskets and body, especially when replacing a short section or joining two existing ends. TECTUL specifies it by nominal diameter and pipe material. It differs from a threaded union because it does not require preparing threads on the ends; and from a flange-type union because its tightening is compact. Leak-tightness depends on clean ends, alignment, and uniform seal compression.
| Actual lot size | Unit |
|---|---|
| 1" | Unit |
| 1-1/4" | Unit |
| 1-1/2" | Unit |
| 2" | Unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the Dresser nut-type coupling indicating size, fluid, pipe type, and quantity to confirm availability.
The price depends on the size, material, connection, and requested quantity. TECTUL validates availability and quotes according to the required reference.
It differs by function, material, or connection type. Choosing the correct piece avoids adapting incompatible fittings and reduces leakage risk.
Install it with clean surfaces, compatible size, and the method required by the material: thread with sealant, PVC with cementing, or PP with controlled heat fusion.
Order the actual nominal size of the pipe or receiving fitting. For reductions and saddles, always indicate main diameter and outlet diameter.
It depends on the material, fluid, temperature, and system standard. Before purchasing, confirm the application to select a compatible alternative.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other cities in Colombia depending on logistics availability.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
