Stainless Steel Y Strainer is a product in the filters family for fluid conduction in stainless steel. 6 sizes published with per-variant price and availability. Price from $ 62.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58722-01 | 1/2" | $ 62.000 | In stock | ||
| VT-58722-02 | 3/4" | $ 62.000 | In stock | ||
| VT-58722-03 | 1" | $ 62.000 | In stock | ||
| VT-58722-04 | 1-1/4" | $ 62.000 | In stock | ||
| VT-58722-05 | 1-1/2" | $ 62.000 | In stock | ||
| VT-58722-06 | 2" | $ 62.000 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Filters |
| Material | Acero inoxidable |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
The stainless steel Y strainer is a fluid conveyance accessory designed to retain solid particles before pumps, valves, meters, nozzles or sensitive equipment. Its stainless steel body makes it a practical option when better corrosion resistance is sought than in bronze or plastic strainers, especially in industrial water networks, recirculation, washing, light processes and installations where periodic cleaning of the filtering element is part of maintenance. This reference differs from the bronze Y strainer by its material and from the disc filter because it works as an in-line strainer, not as a disc system for irrigation. The lot data sheet does not state a specific manufacturing standard, so selection must be made by size, chemical compatibility of the fluid, installation connection type and real operating conditions.
| Actual lot data | Available options |
|---|---|
| Material | Stainless steel |
| Sales unit | Units (Unid.) |
| Sizes | 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" |
| Declared standard | Not stated in product data |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your stainless steel Y strainer indicating size, fluid, required connection and quantity.
The price depends on size and availability. For a quick quote, send the required size, quantity and delivery city via WhatsApp.
The main difference is the material. Stainless steel is chosen when corrosion resistance and cleaning are prioritized; bronze is usually used in general hydraulic networks where that material is compatible.
It must be installed in-line, before the equipment to be protected, observing the flow direction if indicated on the body and leaving access to remove the filtering element.
It depends on the exact steel grade, gaskets, connection and sanitary requirements of the project. The lot data sheet only states stainless steel, so the application should be validated before buying.
This lot records sizes of 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2".
The frequency depends on the amount of solids in the fluid. During operation, loss of flow, noise or increased restriction are signs to inspect and clean.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Updated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
