Black Case Dry Pressure Gauge, Brass Internals is a product in the instrumentation family for fluid conduction in bronze, ASME B40.100-2022. 9 sizes published with per-variant price and availability. Price from $ 20.100 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-SER-MAN-CN-01 | 2" · vertical (inferior) 1/4" NPT | $ 20.100 * | In stock | ||
| VT-SER-MAN-CN-02 | 4" · vertical (inferior) 1/2" NPT | $ 20.100 * | In stock | ||
| VT-SER-MAN-CN-03 | 4" · trasera 1/2" NPT | $ 20.100 * | In stock | ||
| VT-SER-MAN-CN-04 | 1,5" · vertical (inferior) 1/8" NPT | $ 20.100 * | Made to order | ||
| VT-SER-MAN-CN-05 | 1,5" · trasera 1/8" NPT | Request a quote | Made to order | ||
| VT-SER-MAN-CN-06 | 2" · trasera 1/4" NPT | Request a quote | Made to order | ||
| VT-SER-MAN-CN-07 | 2" · trasera 1/8" NPT | Request a quote | Made to order | ||
| VT-SER-MAN-CN-08 | 2,5" · vertical (inferior) 1/4" NPT | $ 20.100 * | Made to order | ||
| VT-SER-MAN-CN-09 | 2,5" · trasera 1/4" NPT | $ 20.100 * | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping. Sizes marked with * show the base reference price.
| Family | Instrumentation |
| Material | Bronce |
| Standard | ASME B40.100-2022 |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
The black case pressure gauge is the entry-level dry gauge of this subfamily: black-finish case with brass internals and connection, for water, air, oil and non-corrosive liquids in service without strong vibration. It is the lowest-priced gauge line in the catalog: from COP $20,100 before VAT.
| Dial | Diameter (mm) | Connection | NPT thread | Availability |
|---|---|---|---|---|
| 1.5" | 38.1 | bottom (lower) or back | 1/8" | made to order — bottom COP $20,800 |
| 2" | 50.8 | bottom (lower) or back | 1/8" and 1/4" | bottom 1/4" in stock — COP $20,100 |
| 2.5" | 63.5 | bottom (lower) or back | 1/4" | made to order — COP $28,500 / $32,500 |
| 4" | 101.6 | bottom (lower) or back | 1/2" | in stock — COP $78,500 / $90,900 |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
The pressure range of each variant is defined at quotation based on your operating point; the source data sheets do not publish a per-variant range. The most requested range ladder in the Colombian market is 15, 30, 60, 100, 160, 200 and 300 psi (1.0 to 20.7 bar).
Dial pressure gauges are selected and installed per ASME B40.100-2022 (Pressure Gauges and Gauge Attachments).
For corrosive fluids, move to the stainless steel dry gauge; for vibrating lines, to the glycerin-filled gauge.
It is a dry gauge with a black-finish case and brass internals, the entry line by price for measuring pressure in water, air, oil and non-corrosive liquids. Offered in 1.5" to 4" dials with 1/8" to 1/2" NPT threads.
From COP $20,100 + VAT for the 2" dial with bottom (lower) 1/4" NPT connection; the 4" dial costs COP $78,500 (bottom) and $90,900 (back). In stock: 2" bottom and both 4" versions.
No: this series is rated for water, air, oil and non-corrosive liquids. For corrosive media use the gauge with stainless steel case and internals.
The bottom (lower) connection is used when mounting the gauge directly on the line or its fittings; the back connection, when flush-mounting it on a panel. Both are in the variant table.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Glycerin-Filled Stainless Steel Pressure Gauge
Calibratable Dry Stainless Steel Pressure Gauge
Dry-Damped Stabilizer Pressure Gauge
Low-Pressure Capsule Gauge, in H2O Scale
Stainless Steel Vacuum Gauge and Compound GaugeUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
