Horizontal Woltmann Bulk Water Meter is a product in the water meters family for fluid conduction in cast iron, ISO 4064 / AWWA C701. Available made to order, quoted via WhatsApp. Supplied on request.
| Family | Water meters |
| Material | Hierro fundido |
| Standard | ISO 4064 / AWWA C701 |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
The horizontal Woltmann bulk water meter is a velocity meter for higher-flow networks, metering stations, building inlets, industries, irrigation and water supply systems. Its turbine works with the shaft aligned to the main flow direction, which distinguishes it from the vertical Woltmann, selected when hydraulic configuration or space favors another orientation. At TECTUL it is specified in cast iron and referenced to ISO 4064 / AWWA C701, standards used for turbine-type water meters and network metering. It is a solution for bulk consumption control, water balance and sectorization, provided the design considers operating flow rate, orientation, flanged or equivalent connection, water quality and accessibility for reading or maintenance.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your horizontal Woltmann bulk water meter with TECTUL indicating diameter, required standard and connection type.
The price depends on diameter, requested standard, connection, reading and accessories. TECTUL quotes against the project data sheet or requirement.
The horizontal meter is installed in lines where the main orientation favors horizontal shaft and reading; the vertical meter is used when the network configuration requires another orientation.
It must remain aligned, supported by suitable piping or structure, with correct flow direction, isolation valves and access for reading.
Yes, it can be used in water supply networks if the diameter, standard and configuration match the operator specification.
According to the TECTUL lot, this bulk water meter is specified in cast iron.
The product is referenced with ISO 4064 / AWWA C701. Request technical documentation if the project requires traceability.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Single-Jet Water Meter
Multi-Jet Water Meter
Rotary Piston Volumetric Water Meter
Vertical Woltmann Bulk Water Meter
Ultrasonic Water MeterUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
