Pneumatic Air Filter Series A/B is a product in the pneumatic components family for fluid conduction. 3 sizes published with per-variant price and availability. Price from $ 28.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-283596-01 | 1/4" Mini | $ 28.600 | In stock | ||
| VT-283596-02 | 1/4" | $ 28.600 | In stock | ||
| VT-283596-03 | 1/2" | $ 28.600 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pneumatic components |
| Connection | Other |
| Availability | In stock |
The Pneumatic Air Filter Series A/B from TECTUL is a technical product for particle and condensate removal in compressed-air networks. It is selected by size, material or construction, fluid compatibility, connection type and actual operating conditions. Its base material or construction is compressed-air components; material to confirm on data sheet. It differs from a filter regulator because this product filters only and does not adjust pressure. To quote correctly, indicate diameter or size, quantity, length or rolls, fluid, temperature, suction or discharge service, and required connection.
| Size | Presentation |
|---|---|
| 1/4" Mini | Confirm when quoting |
| 1/4" | Confirm when quoting |
| 1/2" | Confirm when quoting |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this pneumatic air filter series a/b indicating size, quantity, application, city and required connection to confirm availability and price.
The price depends on size, presentation, quantity, availability and required connections. TECTUL quotes according to the actual installation data.
The difference is the intended service and construction. This reference is selected for particle and condensate removal in compressed-air networks, while the alternative should be validated separately.
Install without torsion, use compatible connections and verify leak-tightness or operation before putting the line or component into service.
Send size, quantity, length or presentation, fluid, operating temperature, application, city and required connection or terminal type.
No. Compatibility depends on material, fluid, pressure, temperature, cleanliness, vibration and actual service conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Series A/B Air Regulator
3-Part Pneumatic Maintenance Unit - FRL Series JA
Air Filter Regulator Series A/B
Red Pneumatic Air Blow Gun
Pneumatic Air Filter Series JAUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
