Series A/B Air Regulator is a product in the pneumatic components family for fluid conduction. 3 sizes published with per-variant price and availability. Price from $ 56.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58726-01 | 1/4" | $ 56.600 | In stock | ||
| VT-58726-02 | 3/8" | $ 56.600 | In stock | ||
| VT-58726-03 | 1/2" | $ 56.600 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pneumatic components |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
Series A/B Air Regulator with Pressure Gauge is a TECTUL product for controlling and adjusting working pressure after the compressor or main network, protecting pneumatic cylinders, valves, tools and actuators. It is selected by connection size, function within air treatment, compatibility with existing equipment and expected maintenance. Its material or base construction is handled as components for compressed air; material to be confirmed in the data sheet. It differs by its Series A/B configuration with visible pressure gauge and reported 1/4", 3/8" and 1/2" connections, different from the Series JA regulator and the high-pressure regulator. This lot does not report a closed dimensional standard or complete material for all components; therefore selection must be confirmed with technical data sheet, fluid, connection and real operating conditions. To quote correctly, it is useful to report size, quantity, compressor or network type, installation point, approximate equipment consumption, required air quality and whether it replaces an existing reference. We do not publish a single maximum pressure because performance depends on manufacturer design, temperature, flow rate, lubrication, vibration, installation and accessories installed upstream and downstream.
| Actual reported size | Presentation |
|---|---|
| 1/4" | Sold by Units (Unid.) |
| 3/8" | Sold by Units (Unid.) |
| 1/2" | Sold by Units (Unid.) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this series a/b air regulator with pressure gauge indicating size, quantity, application, city and whether you need to replace an installed reference.
The price depends on size, series, quantity, availability and accessories such as pressure gauge, bracket, coupling or spare part. TECTUL quotes with the real installation data.
Series A/B is purchased when this body family and lot sizes are required; Series JA is another dimensional line and must not be mixed without checking bracket, thread and required flow.
Install it after main filtration, with the pressure gauge oriented for safe reading and with flow in the direction indicated by the body.
Send connection size, quantity, reference photo if it is a replacement, application, dispatch city and whether the line requires filtration, regulation or lubrication.
No. Flow rate, system working pressure, air quality, humidity, temperature, vibration, connection and compatibility with pneumatic equipment must be validated.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
3-Part Pneumatic Maintenance Unit - FRL Series JA
Pneumatic Air Filter Series A/B
Air Filter Regulator Series A/B
Red Pneumatic Air Blow Gun
Pneumatic Air Filter Series JAUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
