Aluminum nozzle for hose — irrigation, washing and bailing
TECTUL · Dispatch across Colombia · Exports to Central & South America
Aluminum nozzle that connects to the end of a hose to adapt or concentrate its discharge for irrigation, light washing or water bailing. Distinct from pressure-washer nozzles (see the FT-TC-RAC-BOQUILLA-HIDROLAVADORA-001 sheet), which work at higher pressure with a quick-connect trigger mount: this family connects directly to a domestic or agricultural low-pressure hose, including the 1/2″ directed-jet variant for garden and agricultural irrigation.
Important: Before using these data in engineering, design or installation decisions on systems exposed to mechanical, pressure, rupture, fatigue, impact or water-hammer risk, it is essential to read the technical notice and limitation of liability at the end of this sheet.
SKU VT-58637 (aluminum nozzle) and VT-86886 (1/2″ garden sprayer) · sold by the unit
1. Technical specifications
| Aluminum nozzle (VT-58637) | Adapts or concentrates a hose's discharge for irrigation, light washing or bailing |
| 1/2″ garden sprayer (VT-86886) | Directed jet for garden and agricultural irrigation, 1/2″ connection |
| Material (both) | Aluminum |
| Connection | Direct to domestic or agricultural hose (verify diameter with the supplier) |
| Working pressure | Low domestic/agricultural pressure — not suitable for pressure-washer pressure; exact rating confirmed on quotation |
2. Frequently asked questions
Is it suitable for a pressure washer?
No; this family connects directly to a low-pressure domestic or agricultural hose, not the high-pressure quick-connect trigger mount of pressure-washer nozzles.
What is the difference between the aluminum nozzle and the garden sprayer?
The aluminum nozzle is general-purpose (adapts/concentrates the stream); the garden sprayer is specific to 1/2″ directed irrigation for garden and agriculture.
3. Application notes
Feasibility
Suitable for irrigation, light washing and bailing with low-pressure domestic or agricultural hose. They do not substitute for pressure-washer nozzles in high-pressure applications.
Installation
Connect directly to the hose end, verifying diameter compatibility. Secure with a clamp if the connection is not threaded.
Design
Confirm the exact connection diameter and pressure rating with the supplier before specifying.
4. Technical notice and limitation of liability
The pressures, dimensions, weights and other characteristics in this sheet are theoretical calculation values obtained from nominal properties published in the standards cited (ASME B36.10-2022, ASME B31.3-2024, ASTM A106/A106M-19a, ASTM A53/A53M-24, API Spec 5L 46th ed.). They guide selection; they are not a certificate of conformity for any given lot.
The actual behavior of each lot varies with manufacturing — wall tolerance (up to −12.5%), out-of-roundness, residual stresses — and with the raw material — chemical composition within the ranges the standard allows, heat-to-heat differences. To certify a lot, the tests defined by its product standard are required: tensile test, flattening test and hydrostatic test, documented in the manufacturer's mill test certificate (MTC), which TECTUL supplies upon request; testing of the lot in an independent laboratory can also be arranged.
These values must not be used as the sole criterion in critical or safety applications, or wherever failure of the line may compromise people, property or the environment: in such cases the design belongs to the project's responsible engineer under the applicable code (ASME B31.3, B31.1 or the one governing the installation), with the design temperature, corrosion allowance and load cases of the actual service. Before deciding with these data, consult our technical team.
Sources
- Páginas de producto TECTUL "Boquilla Aluminio para Manguera" (SKU VT-58637) y "Boquilla Chorro Jardín 1/2″" (SKU VT-86886), previews/conduccion-de-fluidos/racores-y-acoples/: función y aplicación
This data sheet is the property of TECTUL, part of the Industrias IMR group. Reproduction without attribution is prohibited. Original document and updates: tectul.com/en/conduccion-de-fluidos/racores-y-acoples/ficha-tecnica-boquilla-aluminio.