Schedule 10 Carbon Steel Pipe is a product in the pipe & tubing family for fluid conduction in carbon steel, SCH 10. 8 sizes published with per-variant price and availability. Price from $ 162.400 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-tubo-acero-al-carbon-sch10-01 | 1-1/4" | $ 162.400 | Made to order | ||
| VT-tubo-acero-al-carbon-sch10-02 | 1-1/2" | $ 187.206 | Made to order | ||
| VT-tubo-acero-al-carbon-sch10-03 | 2" | $ 236.194 | Made to order | ||
| VT-tubo-acero-al-carbon-sch10-04 | 2-1/2" | $ 322.212 | Made to order | ||
| VT-tubo-acero-al-carbon-sch10-05 | 3" | $ 374.591 | Made to order | ||
| VT-tubo-acero-al-carbon-sch10-06 | 4" | $ 479.526 | Made to order | ||
| VT-tubo-acero-al-carbon-sch10-07 | 6" | $ 801.917 | Made to order | ||
| VT-tubo-acero-al-carbon-sch10-08 | 8" | $ 1.495.775 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe & tubing |
| Material | Acero al carbón |
| Standard | SCH 10 |
| Connection | Other |
| Sales unit | Se vende por Tubos (Tub.) |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
Schedule 10 carbon steel pipe is light-wall pipe for industrial conveying when the engineering calculation does not require a heavier schedule. It is selected by NPS, material, thickness, fluid, temperature and design code; ASME B36.10M defines dimensions by schedule and standards such as ASTM A53/A106 may apply according to manufacture and service. Its advantage over SCH80 or SCH160 is lower weight and cost per length, but it must not replace higher-thickness pipe without validating pressure, corrosion allowance and installation.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for Schedule 10 pipe with diameter, required standard, quantity and delivery city to receive an offer adjusted to the project.
Pick your diameter and service conditions: the calculator estimates the indicative allowable pressure of each schedule so you can compare.
| Schedule | Wall thickness (mm) | Indicative pressure |
|---|
The price depends on diameter, requested standard, quantity, finish and availability. At TECTUL we quote by pipe or by project with nationwide delivery.
SCH10 is a lighter-wall option for lines with lower calculated requirements; seamless SCH80 is used when the design requires greater thickness and mechanical demand.
It is normally installed by welding or with compatible fittings, according to the line specification. End preparation, alignment and procedure must be validated before pressurizing.
ASME B36.10M is used for dimensions by schedule; the manufacturing standard may vary between ASTM A53, ASTM A106 or another project specification.
There is no single publishable pressure for SCH10. It must be calculated with diameter, thickness, material, temperature, corrosion allowance and design code.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and all of Colombia depending on availability and logistics instructions.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Seamless Schedule 40 Carbon Steel Pipe
Heavy Type Galvanized Schedule 40 Pipe (Conveying)
PP-R Fusion Pipe PN16/RDE 7.4 Domestic Use
Rigid Copper Tube Type L
Welded Schedule 40 Stainless Steel PipeUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
