Stainless Steel Swing Check Valve is a product in the valves family for fluid conduction in stainless steel. 6 sizes published with per-variant price and availability. Price from $ 62.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-87049-01 | 1/2" | $ 62.600 | In stock | ||
| VT-87049-02 | 3/4" | $ 62.600 | In stock | ||
| VT-87049-03 | 1" | $ 62.600 | In stock | ||
| VT-87049-04 | 1-1/4" | $ 62.600 | In stock | ||
| VT-87049-05 | 1-1/2" | $ 62.600 | In stock | ||
| VT-87049-06 | 2" | $ 62.600 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Valves |
| Material | Acero inoxidable |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The threaded stainless steel swing check valve is a non-return valve for lines where the fluid must move in only one direction. It is used in water, air or services compatible with stainless steel, preventing backflow toward pumps, equipment or branches. It does not replace a manual shutoff valve or flow regulation: it opens with normal flow and closes when pressure reversal occurs. This page differentiates it from other check valves by geometry, material and threaded connection, criteria that change head loss, mounting orientation and maintenance. TECTUL validates flow direction, size and fluid before quoting.
| Available size | Actual lot data |
|---|---|
| 1/2" | Available for quotation by unit |
| 3/4" | Available for quotation by unit |
| 1" | Available for quotation by unit |
| 1-1/4" | Available for quotation by unit |
| 1-1/2" | Available for quotation by unit |
| 2" | Available for quotation by unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch threaded stainless steel swing check valve to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp with size, line material, fluid, quantity and actual operating conditions to confirm compatibility before purchasing.
The price depends on size, material, connection and availability. TECTUL quotes by unit with the actual application data.
The difference is in internal geometry, material and mounting orientation. A globe, swing and vertical check do not behave the same.
It is installed with the compatible connection, respecting the component's flow direction or orientation and without transferring pipe loads to the body.
Send size, required material, fluid, connection type, quantity, dispatch city and known operating conditions.
It depends on the material in contact with the fluid and the sanitary requirements of the project. TECTUL validates compatibility before dispatch.
Yes. TECTUL dispatches to Medellín, Cali, Barranquilla and intermediate cities by carrier or coordinated pickup.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
