Polypropylene Fusion Ball Valve Cold Fluid is a product in the valves family for fluid conduction in polypropylene. 10 sizes published with per-variant price and availability. Fusion connection. Price from $ 13.200 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59191-01 | 20 mm - VERDE | $ 13.200 | In stock | ||
| VT-59191-02 | 20 mm - AZUL | $ 13.200 | In stock | ||
| VT-59191-03 | 25 mm - VERDE | $ 13.200 | In stock | ||
| VT-59191-04 | 25 mm - AZUL | $ 13.200 | In stock | ||
| VT-59191-05 | 32 mm - VERDE | $ 13.200 | In stock | ||
| VT-59191-06 | 32 mm - AZUL | $ 13.200 | In stock | ||
| VT-59191-07 | 40 mm - VERDE | $ 13.200 | In stock | ||
| VT-59191-08 | 40 mm - AZUL | $ 13.200 | In stock | ||
| VT-59191-09 | 50 mm - VERDE | $ 13.200 | In stock | ||
| VT-59191-10 | 50 mm - AZUL | $ 13.200 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Valves |
| Material | Polipropileno |
| Connection | Fusion |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The Polypropylene fusion ball valve cold fluid from TECTUL is a fluid conveyance valve designed to open and close cold-water networks in fusion polypropylene installations. It is selected by size, material, connection, flow direction, chemical compatibility and function within the system. In this product the base material is polypropylene and the technical purchasing criterion is a compatible heat-fusion system. It differs from the hot-fluid version by its identification and application in cold-water networks. For an industrial quote, indicate the exact size, fluid, whether the line works in suction, discharge, pressure, steam, gas, air or water, and whether the assembly requires thread, fusion, welding, sanitary connection or panel installation. TECTUL focuses this reference for buyers who need availability by size, responsible selection and technical support before installation.
| Reported real size | Presentation |
|---|---|
| 20 mm - GREEN | Sold by units (Unit) |
| 20 mm - BLUE | Sold by units (Unit) |
| 25 mm - GREEN | Sold by units (Unit) |
| 25 mm - BLUE | Sold by units (Unit) |
| 32 mm - GREEN | Sold by units (Unit) |
| 32 mm - BLUE | Sold by units (Unit) |
| 40 mm - GREEN | Sold by units (Unit) |
| 40 mm - BLUE | Sold by units (Unit) |
| 50 mm - GREEN | Sold by units (Unit) |
| 50 mm - BLUE | Sold by units (Unit) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the polypropylene fusion ball valve cold fluid indicating size, quantity, fluid and connection type to confirm availability and price.
The price depends on size, connection, quantity and availability. Write to TECTUL with the fluid and application to quote the correct reference.
The hot-fluid version is selected for compatible thermal lines; the cold-fluid version is used in PP-R cold-water networks and shutoff points.
Perform heat fusion with clean dies and align the handle before the joint cools.
Indicate size, quantity, fluid, system working pressure, temperature, required connection and whether the valve is for shutoff, check, regulation or safety.
No. Compatibility depends on body, seals, gaskets, temperature, fluid cleanliness and real operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia according to availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene Fusion
Polypropylene Fusion Ball Valve for Hot FluidUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
