Helbert Bronze Hydro Check Valve is a product in the valves family for fluid conduction in bronze. 7 sizes published with per-variant price and availability. Price from $ 127.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59230-01 | 1" | $ 127.000 | In stock | ||
| VT-59230-02 | 1-1/4" | $ 127.000 | In stock | ||
| VT-59230-03 | 1-1/2" | $ 127.000 | In stock | ||
| VT-59230-04 | 2" | $ 127.000 | In stock | ||
| VT-59230-05 | 2-1/2" | $ 127.000 | In stock | ||
| VT-59230-06 | 3" | $ 127.000 | In stock | ||
| VT-59230-07 | 4" | $ 127.000 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Valves |
| Material | Bronce |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The bronze hydro check valve from TECTUL is a fluid handling valve designed to protect pumps and networks by preventing water backflow in hydraulic systems. It is selected by size, material, connection, flow direction, chemical compatibility and function within the system. In this product the base material is bronze and the technical purchasing criterion is non-return valve for hydraulic networks. It differs from the bronze swing check valve because it is identified for hydro service and pumping in broad commercial sizes. For an industrial quotation, it is advisable to indicate the exact size, the fluid, whether the line works in suction, discharge, pressure, steam, gas, air or water, and whether the installation requires thread, fusion, welding, sanitary connection or panel installation. TECTUL focuses this reference on buyers who need availability by size, responsible selection and technical support before installation.
| Actual reported size | Presentation |
|---|---|
| 1" | Sold by units (Unid.) |
| 1-1/4" | Sold by units (Unid.) |
| 1-1/2" | Sold by units (Unid.) |
| 2" | Sold by units (Unid.) |
| 2-1/2" | Sold by units (Unid.) |
| 3" | Sold by units (Unid.) |
| 4" | Sold by units (Unid.) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the bronze hydro check valve, indicating size, quantity, fluid and connection type to confirm availability and price.
The price depends on size, connection, quantity and availability. Write to TECTUL with the fluid and application to quote the correct reference.
The swing check is requested by swing type; the hydro check is used when the buyer needs retention for pumping or a bronze hydraulic network.
Install it after the pump or at the point indicated by the design, always respecting the flow direction.
Indicate size, quantity, fluid, system working pressure, temperature, required connection and whether the valve will be for shutoff, check, regulation or safety.
No. Compatibility depends on the body, seals, gaskets, temperature, fluid cleanliness and actual operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
