Flanged Ball Valve with Pneumatic Actuator is a product in the valves family for fluid conduction in stainless steel, ANSI 150. Available made to order, quoted via WhatsApp. Flanged connection. Supplied on request.
| Family | Valves |
| Material | Acero inoxidable |
| Standard | ANSI 150 |
| Connection | Flanged |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
Flanged ball valve with pneumatic actuator is a TECTUL solution for automating shutoff in flanged process piping, pumping, auxiliary services, and compatible fluids. It is purchased by function, material, connection, and compatibility, not only by physical resemblance to another valve. The main reported material is stainless steel, and the differentiating criterion is a class 150 flanged body with pneumatic actuator for remote operation. The lot reference reports ANSI 150 as a relevant standard or commercial interface; when the project requires flange dimensions, materials, or tests, the technical data sheet and applicable specification must be validated before purchasing. For a useful quote, it is advisable to provide nominal size, quantity, fluid, service temperature if applicable, mounting orientation, actuation type, and whether the line requires shutoff, retention, regulation, diversion, or automation. This description avoids publishing generic maximum pressures because actual capacity depends on the complete design, seals, temperature, and the code used by the project.
We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for this flanged ball valve with pneumatic actuator indicating size, quantity, fluid, and connection to confirm availability and price.
The price depends on size, material, connection, quantity, availability, and required accessories. At TECTUL we quote based on the fluid and actual application.
The pneumatic valve uses air and can respond quickly; the electric valve avoids an air network and integrates when only electrical power is available.
Align flanges, support the line, verify actuation torque, and calibrate pneumatic accessories before operating with fluid.
Send size, quantity, fluid, connection, required material, standard if applicable, and a photo or drawing when replacing an existing valve.
No. Compatibility of the body, seals, gaskets, and internal components must be validated with the fluid, temperature, and line cleanliness.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other Colombian cities depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
