150 Lb Flanged Ball Valve is a product in the valves family for fluid conduction in iron. Available made to order, quoted via WhatsApp. Flanged connection. Price from $ 441.000 COP before VAT.
| Family | Valves |
| Material | Hierro |
| Connection | Flanged |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
Class 150 flanged ball valve is a TECTUL fluid handling reference designed to isolate flanged pipe sections in industrial water, air or compatible fluid networks. It is selected by size, connection, material, compatibility with the fluid, mounting orientation and function within the system. In this product the main material or assembly is iron and the technical purchasing criterion is Class 150 flanged connection according to project. It differs from a threaded ball valve because it is installed between flanges, with gaskets and bolts defined by the line. To quote accurately, it is advisable to indicate the actual fluid, size, quantity, connection type and whether the product will work as shutoff, check, regulation, relief, automation, irrigation, protection or terminal point. This page is written for industrial buyers who need to compare the correct reference before installing, avoid substitutions based on appearance and request technical support with concrete data.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this reference, indicating size, quantity, fluid and connection type to confirm availability and price.
The price depends on size, material, connection, quantity and availability. Send us the fluid and application to quote the correct reference at TECTUL.
The threaded version is used in compact diameters and installations; the Class 150 flanged version integrates into lines with flanges and maintenance by face-to-face disassembly.
Align the flanges, use a compatible gasket and tighten the bolts in a cross pattern to avoid stress on the body.
Indicate size, quantity, fluid, connection, temperature or service condition, and whether the part will work as shutoff, check, regulation, relief or automation.
No. Compatibility depends on the body, seals, gaskets, temperature, fluid cleanliness and actual operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
