Double-Eccentric Butterfly Valve is a product in the valves family for fluid conduction in carbon steel, ANSI 150. Available made to order, quoted via WhatsApp. Supplied on request.
| Family | Valves |
| Material | Acero al carbón |
| Standard | ANSI 150 |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
The double-eccentric butterfly valve ANSI 150 is a quarter-turn valve for shutoff or basic modulation in compatible industrial lines. The declared material is carbon steel and standard ANSI 150; when ANSI 150 appears, it should be read as the project's connection class, not as a universal maximum pressure. In butterfly valves, the decisive attribute may be lug body, wafer, flanged, double eccentricity, aluminum, sanitary, or PTFE seat. TECTUL selects it according to flanges, fluid, seat, manual or actuated operation, and applicable design standard such as API 609, MSS SP-67, or ISO 5211 interface when required by the project.
We dispatch double-eccentric butterfly valve ANSI 150 to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp with size, line material, fluid, quantity, and actual operating conditions to confirm compatibility before purchasing.
The price depends on size, material, connection, and availability. TECTUL quotes per unit using the actual application data.
The body changes: wafer, lug, flanged, sanitary, aluminum, or double eccentricity. This affects installation, maintenance, and recommended service.
It is installed with the compatible connection, respecting flow direction or component orientation and without transferring pipe loads to the body.
Send size, required material, fluid, connection type, quantity, dispatch city, and known operating conditions.
It depends on the material in contact with the fluid and the project's sanitary requirements. TECTUL validates compatibility before dispatch.
Yes. TECTUL dispatches to Medellín, Cali, Barranquilla, and intermediate cities through a carrier or coordinated pickup.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
