Pneumatic Valve with Selector Knob is a product in the valves family for fluid conduction in plastic. 1 size published with per-variant price and availability. Price from $ 59.900 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-87057-01 | 1/4" - 2/2 | $ 59.900 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Valves |
| Material | Plástico |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The pneumatic valve with selector knob is used in pneumatic circuits to shut off, select or regulate air flow in tubing, actuators, panels and machines. Purchasing must start from the tube outside diameter, thread or connection type, circuit function and compressed air quality. It differs from hydraulic or water valves because its internal passages, actuation and connections are designed for air and instrumentation. TECTUL separates needle, union, shutoff and knob valves to avoid confusing fine regulation with simple opening and closing.
| Available size | Actual lot data |
|---|---|
| 1/4" - 2/2 | Available for quotation by unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch pneumatic valve with selector knob to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp with size, line material, fluid, quantity and actual operating conditions to confirm compatibility before purchasing.
The price depends on size, material, connection and availability. TECTUL quotes by unit with the actual application data.
It may be a shutoff, needle, regulating union or selector knob valve. The circuit function defines which one applies.
It is installed with the compatible connection, respecting the component's flow direction or orientation and without transferring pipe loads to the body.
Send size, required material, fluid, connection type, quantity, dispatch city and known operating conditions.
It depends on the material in contact with the fluid and the sanitary requirements of the project. TECTUL validates compatibility before dispatch.
Yes. TECTUL dispatches to Medellín, Cali, Barranquilla and intermediate cities by carrier or coordinated pickup.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
