H/AH Adapter Sleeve groups 24 references to lock taper-bore bearings onto plain shafts. It spans eje (shaft) 35 to 170 mm. Available in CBR, FAG, TIMKEN, SKF. Nominal dimensions per DIN 5415. No online price: quoted via WhatsApp with the exact reference.
Pick your references in the table (Add) or send us the exact designation with its suffixes — a technical advisor confirms brand, price and lead time the same business day.
| Reference | Brand | eje (shaft) (mm) | d (mm) | Qty | ||
|---|---|---|---|---|---|---|
| AHX -3124 | CBR | — | 120 | |||
| AHX2318 | FAG | — | 90 | |||
| H 319 | CBR | 85 | 95 | |||
| H 322 | CBR | 100 | 110 | |||
| H 2308 | CBR | 35 | 40 | |||
| H 2309 | CBR | 40 | 45 | |||
| H 3128 | CBR | 125 | 140 | |||
| H-308 | CBR | 35 | 40 | |||
| H-316 | CBR | 70 | 80 | |||
| H2330 | CBR | 135 | 150 | |||
| H2338 | CBR | 170 | 190 | |||
| H3124 | CBR | 110 | 120 | |||
| H414249 | TIMKEN | — | — | |||
| HA315 | CBR | — | 75 | |||
| HA3134 | CBR | — | 170 | |||
| HE 308 | CBR | — | 40 | |||
| HE 309 | CBR | — | 45 | |||
| HE 2317 | CBR | — | 85 | |||
| HE-31 2 | CBR | — | 60 | |||
| HE-311 | CBR | — | 55 | |||
| HE-315 | CBR | — | 75 | |||
| HE208 | SKF | — | 40 | |||
| HE311 | CBR | — | 55 | |||
| HE318 | CBR | — | 90 |
“—” = dimension being verified against manufacturer tables. Nominal values; they are not a batch certificate. Availability is confirmed in the formal quote.
The H/AH adapter sleeve is a mechanical accessory used to secure tapered-bore bearings on cylindrical shafts or to remove them in a controlled way, depending on the equipment configuration. In industrial purchasing in Colombia it is requested as H sleeve, AH sleeve, adapter sleeve or withdrawal sleeve, always with complete reference. This sheet groups the H/AH series and must not be confused with a bearing sheet: the sleeve works together with the bearing, nut, lock washer and shaft. Selection depends on shaft diameter, compatible bearing series, available axial space and mounting condition. TECTUL quotes by reference, because an H 2308, an H 3128 or an AHX2318 correspond to different assemblies.
| Actual lot data | Value |
|---|---|
| Covered series | H / AH for mounting and dismounting |
| Available references | 24 |
| Dimensional range | shaft 35-170 mm |
| Top references | AHX -3124, AHX2318, H 2308, H 2309, H 3128, H 319, H 322, H-308 |
| Commercial unit | quote by reference |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your H/AH adapter sleeve indicating sleeve reference, bearing reference and shaft diameter.
The price is quoted via WhatsApp according to exact reference, quantity and availability. There is no single price for the whole H/AH family.
The H is commonly used as an adapter sleeve to mount tapered-bore bearings on a cylindrical shaft. The AH is used in withdrawal or mounting configurations depending on the assembly; it must be validated with the bearing.
It is installed on a clean shaft, with the compatible bearing, corresponding nut and washer. Tightening must control axial drive-up and inner-ring fit.
It depends on the reference and commercial availability. When quoting, confirm whether you need only the sleeve or the set with nut and washer.
Yes. Those references are part of the actual data of this sheet and are validated by availability at the time of quote.
Send bearing reference, sleeve reference if you have it, shaft diameter, quantity and delivery city.
