Angular Contact Ball Bearing 72xx/73xx groups 5 references for radial load on rotating shafts. It spans d 20 to 140 mm. Available in SKF, FAG. Nominal dimensions per ISO 15 · ABMA 20. No online price: quoted via WhatsApp with the exact reference.
Pick your references in the table (Add) or send us the exact designation with its suffixes — a technical advisor confirms brand, price and lead time the same business day.
| Reference | Serie | Brand | d (mm) | D (mm) | B (mm) | Qty | ||
|---|---|---|---|---|---|---|---|---|
| 7204 BEP | serie 7200 | SKF | 20 | 47 | 14 | |||
| 7228-B-MP | serie 7200 | FAG | 140 | 250 | 42 | |||
| 7305 BECBY | serie 7300 | SKF | 25 | 62 | 17 | |||
| 7309 BE-2RZP | serie 7300 | SKF | 45 | 100 | 25 | |||
| 7311 BEP | serie 7300 | SKF | 55 | 120 | 29 |
“—” = dimension being verified against manufacturer tables. Nominal values; they are not a batch certificate. Availability is confirmed in the formal quote.
The angular contact ball bearing 72xx/73xx is a single-row ball bearing with raceways designed to transmit combined loads: radial and axial in one direction. Because of this geometry it is used in pumps, spindles, gearboxes, special motors and equipment where axial position, rigidity or paired mounting must be controlled. This sheet covers only the 7200 and 7300 series; it differs from the double-row angular contact 32xx/33xx because each bearing here works as a single-row unit and may require face-to-face, back-to-back or tandem arrangement depending on the case. The dimensional standard indicated for the lot is ISO 15, but purchasing must be done by complete reference and suffixes, because angle, cage, seals, clearance and execution change.
| Actual lot data | Value |
|---|---|
| Covered series | 7200 / 7300 |
| Dimensional standard | ISO 15 |
| Available references | 5 |
| Dimensional range | d 20-140 mm |
| Top references | 7204 BEP, 7228-B-MP, 7305 BECBY, 7309 BE-2RZP, 7311 BEP |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your 72xx/73xx angular contact bearing indicating complete reference, quantity and application.
It is quoted via WhatsApp according to exact reference, suffixes, quantity and availability. A single price is not published because each execution changes the selection.
The 72xx/73xx is single row and is normally configured in pairs if axial load is required in two directions. The 32xx/33xx has two rows in one compact unit.
The contact-angle orientation, support on the fitted ring and preload or clearance defined by the equipment must be respected.
No. They are different references, with different dimensions and behavior. Equivalency is validated with drawing, original reference or assembly measurements.
These references are part of the actual lot of this sheet. Availability is confirmed via WhatsApp before dispatch.
Complete reference, quantity, whether it works alone or in a pair, application, delivery city and photos if the bearing has already been removed.
2Z = steel shield on both sides · 2RS/2RSH = rubber contact seal on both sides · C3 = radial internal clearance greater than normal (thermal expansion) · K = tapered bore. No online price: brand, availability and lead time are confirmed in the formal quote.