Bristol/Allen Socket Head Cap Screw Metric DIN 912 Bcc - 12.9

The Bristol/Allen socket head cap screw is an industrial fastening element with Bristol or Allen drive, used in machinery joints, molds, light structures, equipment, and industrial maintenance. TECTUL offers it in carbon steel 12.9, metric thread, and DIN 912 reference when applicable to the product design. Selection must start from the thread, usable length, head type, and compatibility with the existing threaded part or nut. It differs from countersunk and button versions by its cylindrical head with greater bearing area and key depth. For this lot there are actual sizes such as 10 X 150 to 12 X 55, sold by unit. It is an option for maintenance, fabrication, equipment assembly, spare parts, and assemblies where precise, removable fastening with good tool access is required.

Available sizes

Installation recommendations

• Confirm whether the required thread is UNC, UNF, or metric before requesting a quote; do not mix pitches even if the diameter looks similar.
• Use a Bristol/Allen key in good condition and fully seated to avoid stripping the internal socket.
• Verify that the length does not bottom out in blind holes and that it allows proper seating of the head or tip.
• On stainless steel, avoid contamination with rusted tools and consider compatible lubrication to reduce galling.
• When the joint is critical, define the torque according to the drawing, base material, and project installation procedure.

We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for the Bristol/Allen socket head cap screw, indicating size, thread, material, quantity, and whether you need equivalence with DIN, ISO, or inch thread.