201 stainless steel sheet with 2B finish, an economical alternative to 304 for interiors and applications without high chemical demand. 3 size variants published, thicknesses 0.7 to 1.2 mm, with per-unit prices before VAT.
| SKU | Size | Thickness | Price | Qty | |
|---|---|---|---|---|---|
| VT-lamina-inoxidable-201--01 | 0,7 mm × 1219 × 2438 | 0.7 mm | $ 152.344 | ||
| VT-lamina-inoxidable-201--02 | 0,9 mm × 1219 × 2438 | 0.9 mm | $ 195.844 | ||
| VT-lamina-inoxidable-201--03 | 1,2 mm × 1219 × 2438 | 1.2 mm | $ 261.094 |
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
| Family | Stainless steel sheets & plates |
| Alloy | AISI 201 |
| Finish | 2B finish |
| Shape | Sheet |
| Variants | 3 |
| Availability | In stock |
The 201 stainless steel sheet 2B finish is an economical option for light fabrication, interior cladding, furniture, cabinets, trays, decorative pieces, and work where the environment does not require the same corrosion resistance as 304. AISI 201 belongs to the 200-series austenitic family, with a composition different from 304; therefore it can be attractive by cost, but it must be specified carefully in wet, chemical, or frequently washed areas. The 2B finish is a cold rolled, matte, uniform surface referenced in ASTM A480 nomenclature for stainless flat products. Compared with 304 2B sheet, this reference differs by material and target application: it is recommended for dry interiors or moderate demand, not as an automatic substitute for 304 in food, outdoor, or corrosive service.
| Material | Finish | Available size | Unit |
|---|---|---|---|
| AISI 201 | 2B | 0,70 mm x 1219 x 2438 | unit |
| AISI 201 | 2B | 0,90 mm x 1219 x 2438 | unit |
| AISI 201 | 2B | 1,20 mm x 1219 x 2438 | unit |
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
TECTUL supplies 201 stainless steel 2B sheet for light fabrication and cost-controlled projects. We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp with thickness and quantity.
The price depends on thickness, quantity, and availability. TECTUL quotes by unit and confirms dispatch across Colombia.
201 is a more economical alternative for interiors and low aggressiveness. 304 offers better overall performance against corrosion and washing.
It is cut, bent, and fastened like thin stainless sheet, taking care of the visible face and using clean tools to avoid ferrous contamination.
It is not the first option for outdoor service or demanding humid environments. For those conditions, 304 or another alloy should be evaluated according to the case.
It should only be used if the design, cleaning, and environment allow it. For higher sanitary demand, 304 is normally evaluated.
It is available in 0,70 mm, 0,90 mm, and 1,20 mm, all in 1219 x 2438 format.
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
304 Stainless Steel Checkered Plate (Hot Rolled)
304 Stainless Steel Embossed Checkered Sheet (Cold Pressed)
201 Stainless Steel Sheet #4 PE Finish
304 Stainless Steel Sheet #1 Finish (Hot Rolled)
304 Stainless Steel Sheet #4 PE FinishUpdated: July 29, 2026
The dimensions, thicknesses, finishes and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASTM, ASME, ISO, NTC and EN, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and thickness tolerances, surface finish and residual stresses from rolling or forming — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: overloads, vibration, mechanical or thermal fatigue, corrosion and operating conditions different from those stated.
To know the certified behavior of a specific lot, TECTUL supplies the manufacturer's mill test certificate (MTC) upon request; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever structural integrity may compromise people or property; in such cases, consult our technical team first.
