304 stainless steel sheet with cold-pressed embossed checkered pattern. A lighter alternative for floors, cladding, and anti-slip details. 1 size variant published, 3 mm thick, with per-unit prices before VAT.
| SKU | Size | Thickness | Price | Qty | |
|---|---|---|---|---|---|
| VT-lamina-inoxidable-304--01 | 3,0 mm × 1219 × 2438 | 3 mm | $ 1.109.531 |
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
| Family | Stainless steel sheets & plates |
| Alloy | AISI 304 |
| Finish | Embossed checkered (Cold Pressed) |
| Shape | Sheet |
| Variants | 1 |
| Availability | In stock |
The 304 stainless steel embossed checkered sheet is an AISI 304 sheet with an anti-slip pattern formed by cold embossing. It is useful for floor cladding, vehicle bodies, covers, walkways, equipment guards, and surfaces where grip with a more uniform appearance is desired. It differs from 304 hot rolled checkered plate because the pattern does not come from the original hot rolling process, but from a cold pressed operation on the sheet; for this reason it is often selected when the project requires visual finish, surface protection, or lower structural demand. 304 belongs to the austenitic family and is a standard option for moderate industrial environments, food fabrication, and maintenance. ASTM A480 can be consulted for general stainless sheet and finish criteria; the final decision must consider traffic, support, cleaning, chemical exposure, and fabrication method.
| Material | Finish / pattern | Available size | Unit |
|---|---|---|---|
| AISI 304 | Cold pressed embossed checkered | 2,50 mm x 1219 x 2438 | unit |
| AISI 304 | Cold pressed embossed checkered | 3,00 mm x 1219 x 2438 | unit |
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
TECTUL supplies 304 stainless steel embossed checkered sheet for maintenance, fabrication, and industrial adaptation projects. We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp with thickness, format, and quantity.
The price is calculated by thickness, format, quantity, and availability. TECTUL quotes this reference by unit and confirms dispatch according to city.
No. The embossed version is cold pressed and is widely used for cladding or moderate traffic; hot rolled is preferred when a more robust anti-slip plate is needed.
It must be fixed over a stable base, with finished edges and no loose pieces. On ramps, validate slope, drainage, and type of traffic before installation.
Yes, 304 stainless steel allows welding with compatible procedure and filler. After welding, the affected area should be cleaned to preserve corrosion resistance.
It can be used in passage or protection areas, provided the design allows cleaning and does not accumulate residues in the pattern.
This lot includes 2,50 mm x 1219 x 2438 and 3,00 mm x 1219 x 2438, by unit.
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
304 Stainless Steel Checkered Plate (Hot Rolled)
201 Stainless Steel Sheet #4 PE Finish
201 Stainless Steel Sheet 2B Finish
304 Stainless Steel Sheet #1 Finish (Hot Rolled)
304 Stainless Steel Sheet #4 PE FinishUpdated: July 29, 2026
The dimensions, thicknesses, finishes and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASTM, ASME, ISO, NTC and EN, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and thickness tolerances, surface finish and residual stresses from rolling or forming — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: overloads, vibration, mechanical or thermal fatigue, corrosion and operating conditions different from those stated.
To know the certified behavior of a specific lot, TECTUL supplies the manufacturer's mill test certificate (MTC) upon request; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever structural integrity may compromise people or property; in such cases, consult our technical team first.
