430 stainless steel sheet with bright BA finish and protective film, for decorative panels and applications requiring economical mirror-like brightness. 13 size variants published, thicknesses 0.3 to 3 mm, with per-unit prices before VAT.
| SKU | Size | Thickness | Price | Qty | |
|---|---|---|---|---|---|
| VT-lamina-inoxidable-430--01 | 0,6 mm × 1219 × 2438 | 0.6 mm | $ 118.421 | ||
| VT-lamina-inoxidable-430--02 | 0,7 mm × 1219 × 2438 | 0.7 mm | $ 138.172 | ||
| VT-lamina-inoxidable-430--03 | 0,9 mm × 1219 × 2438 | 0.9 mm | $ 162.225 | ||
| VT-lamina-inoxidable-430--04 | 0,9 mm × 1219 × 3048 | 0.9 mm | $ 215.656 | ||
| VT-lamina-inoxidable-430--05 | 1,5 mm × 1219 × 2438 | 1.5 mm | $ 304.679 | ||
| VT-lamina-inoxidable-430--06 | 1,9 mm × 1219 × 2438 | 1.9 mm | $ 364.145 | ||
| VT-lamina-inoxidable-430--07 | 3,0 mm × 1219 × 2438 | 3 mm | $ 549.200 | ||
| VT-lamina-inoxidable-430--08 | 0,3 mm × 1000 × 3000 | 0.3 mm | $ 59.771 | ||
| VT-lamina-inoxidable-430--09 | 0,45 mm × 1219 × 2438 | 0.45 mm | $ 95.275 | ||
| VT-lamina-inoxidable-430--10 | 1,2 mm × 1219 × 2438 | 1.2 mm | $ 243.708 | ||
| VT-lamina-inoxidable-430--11 | 1,2 mm × 1219 × 3048 | 1.2 mm | $ 304.679 | ||
| VT-lamina-inoxidable-430--12 | 1,2 mm × 1524 × 3048 | 1.2 mm | $ 380.915 | ||
| VT-lamina-inoxidable-430--13 | 2,5 mm × 1219 × 2438 | 2.5 mm | $ 457.680 |
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
| Family | Stainless steel sheets & plates |
| Alloy | AISI 430 |
| Finish | BA finish (PE film) |
| Shape | Sheet |
| Variants | 13 |
| Availability | In stock |
The 430 stainless steel sheet BA PE is a ferritic sheet with bright BA finish and protective plastic film. It is selected for decorative panels, interior cladding, displays, appliances, visible parts, signage, furniture, and applications where brightness with controlled cost is required. The BA finish, also known as bright annealed, is a bright surface achieved by annealing in a controlled atmosphere within stainless flat product finish families referenced by ASTM A480. Compared with 430 2B PE, this version offers greater brightness; compared with 430 #4 PE, it has no directional satin; compared with 304 in visible finishes, 430 is recommended for less aggressive environments. As a ferritic stainless steel, it is normally magnetic and requires careful selection under moisture, chlorides, or intensive chemical cleaning.
| Material | Finish | Available sizes | Unit |
|---|---|---|---|
| AISI 430 | BA PE | 0,30 mm x 1000 x 3000; 0,45 mm x 1219 x 2438; 0,60 mm x 1219 x 2438; 0,70 mm x 1219 x 2438 | unit |
| AISI 430 | BA PE | 0,90 mm x 1219 x 2438; 0,90 mm x 1219 x 3048; 1,20 mm x 1219 x 2438; 1,20 mm x 1219 x 3048; 1,20 mm x 1524 x 3048 | unit |
| AISI 430 | BA PE | 1,50 mm x 1219 x 2438; 1,90 mm x 1219 x 2438; 2,50 mm x 1219 x 2438; 3,00 mm x 1219 x 2438 | unit |
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
TECTUL supplies 430 stainless steel BA PE sheet for decorative fabrication, paneling, and interior cladding. We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp with format and quantity.
The price depends on thickness, format, quantity, and availability. TECTUL quotes by unit and coordinates national dispatch.
BA PE is bright and more reflective. #4 PE is satin with polishing lines, useful when a brushed appearance is desired.
Keep the film during fabrication, avoid dragging the sheet, and use gentle cleaning when removing the final protection.
It is bright, but it should not be assumed to be a perfect mirror. If the project requires mirror finish, the required finish must be specified before quoting.
Yes, 430 is a ferritic stainless steel and normally magnetic.
The lot includes thicknesses from 0,30 mm to 3,00 mm in 1000 x 3000, 1219 x 2438, 1219 x 3048, and 1524 x 3048 formats.
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
304 Stainless Steel Checkered Plate (Hot Rolled)
304 Stainless Steel Embossed Checkered Sheet (Cold Pressed)
201 Stainless Steel Sheet #4 PE Finish
201 Stainless Steel Sheet 2B Finish
304 Stainless Steel Sheet #1 Finish (Hot Rolled)Updated: July 29, 2026
The dimensions, thicknesses, finishes and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASTM, ASME, ISO, NTC and EN, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and thickness tolerances, surface finish and residual stresses from rolling or forming — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: overloads, vibration, mechanical or thermal fatigue, corrosion and operating conditions different from those stated.
To know the certified behavior of a specific lot, TECTUL supplies the manufacturer's mill test certificate (MTC) upon request; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever structural integrity may compromise people or property; in such cases, consult our technical team first.
