Spiral Wound Gasket 150 Pounds ✔️ Certificates is a product in the gaskets & seals family for fluid conduction in 316 stainless steel. 21 sizes published with per-variant price and availability. Price from $ 3.700 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-118934-01 | 1/2" | $ 3.700 | In stock | ||
| VT-118934-02 | 3/4" | $ 3.700 | In stock | ||
| VT-118934-03 | 1" | $ 3.700 | In stock | ||
| VT-118934-04 | 1-1/4" | $ 3.700 | In stock | ||
| VT-118934-05 | 1-1/2" | $ 3.700 | In stock | ||
| VT-118934-06 | 2" | $ 3.700 | In stock | ||
| VT-118934-07 | 2-1/2" | $ 3.700 | In stock | ||
| VT-118934-08 | 3" | $ 3.700 | In stock | ||
| VT-118934-09 | 4" | $ 3.700 | In stock | ||
| VT-118934-10 | 5" | $ 3.700 | In stock | ||
| VT-118934-11 | 6" | $ 3.700 | In stock | ||
| VT-118934-12 | 8" | $ 3.700 | In stock | ||
| VT-118934-13 | 10" | $ 3.700 | In stock | ||
| VT-118934-14 | 12" | $ 3.700 | In stock | ||
| VT-118934-15 | 14" | $ 3.700 | In stock | ||
| VT-118934-16 | 16" | $ 3.700 | In stock | ||
| VT-118934-17 | 18" | $ 3.700 | In stock | ||
| VT-118934-18 | 20" | $ 3.700 | In stock | ||
| VT-118934-19 | 24" | $ 3.700 | In stock | ||
| VT-118934-20 | 30" | $ 3.700 | In stock | ||
| VT-118934-21 | 36" | $ 3.700 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Gaskets & seals |
| Material | Acero inoxidable 316 |
| Connection | Other |
| Availability | In stock |
Certified Spiral Wound Gasket Class 150 is a TECTUL reference for sealing class 150 industrial flanges when the project requests a certified spiral wound gasket. It is purchased by size, presentation and real compatibility with the fluid, not only by commercial name. The base material is stainless steel 316 with compatible filler and the key difference versus nearby products is its certified class 150, different from class 300 or flat fiber gaskets. The reference is selected with ASME B16.20 criteria for spiral wound gaskets when the project requests it. To quote correctly, it is useful to report nominal size, quantity, equipment where it will be installed, fluid, qualitative operating temperature, type of joint and whether the project requires a certificate or technical data sheet. We do not publish a single maximum pressure because performance depends on flange, thread, surface preparation, tightening, curing, storage, temperature, chemical compatibility and commissioning test.
| Actual reported size | Presentation |
|---|---|
| 1/2" | Confirm when quoting |
| 3/4" | Confirm when quoting |
| 1" | Confirm when quoting |
| 1-1/4" | Confirm when quoting |
| 1-1/2" | Confirm when quoting |
| 2" | Confirm when quoting |
| 2-1/2" | Confirm when quoting |
| 3" | Confirm when quoting |
| 4" | Confirm when quoting |
| 5" | Confirm when quoting |
| 6" | Confirm when quoting |
| 8" | Confirm when quoting |
| 10" | Confirm when quoting |
| 12" | Confirm when quoting |
| 14" | Confirm when quoting |
| 16" | Confirm when quoting |
| 18" | Confirm when quoting |
| 20" | Confirm when quoting |
| 24" | Confirm when quoting |
| 30" | Confirm when quoting |
| 36" | Confirm when quoting |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this certified spiral wound gasket class 150 indicating size, quantity, application and certificate requirements to confirm availability and price.
The price depends on size, presentation, material, quantity and availability. TECTUL quotes with the real application to avoid reference errors.
The spiral wound gasket combines metal strip and filler for higher requirements; compressed fiber is flat and used in less critical services.
Use clean and parallel flanges, center the ring, do not reuse compressed gaskets and tighten bolts following the project procedure.
Send size, quantity, material, fluid, photo if it is a replacement, equipment type and whether you need a certificate or technical data sheet.
No. Compatibility depends on material, seal, adhesive, electrode, flange, thread and system operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other Colombian cities according to availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Updated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
