Garlock Gasket 150 Pounds is a product in the gaskets & seals family for fluid conduction. 11 sizes published with per-variant price and availability. Price from $ 24.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58716-01 | 1/2" | $ 24.000 | Made to order | ||
| VT-58716-02 | 3/4" | $ 24.000 | In stock | ||
| VT-58716-03 | 1" | $ 24.000 | Made to order | ||
| VT-58716-04 | 1-1/4" | $ 24.000 | Made to order | ||
| VT-58716-05 | 1-1/2" | $ 24.000 | Made to order | ||
| VT-58716-06 | 2" | $ 24.000 | Made to order | ||
| VT-58716-07 | 2-1/2" | $ 24.000 | Made to order | ||
| VT-58716-08 | 3" | $ 24.000 | Made to order | ||
| VT-58716-09 | 4" | $ 24.000 | Made to order | ||
| VT-58716-10 | 6" | $ 24.000 | Made to order | ||
| VT-58716-11 | 8" (Bajo pedido) | $ 24.000 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Gaskets & seals |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
The class 150 compressed fiber gasket is a die-cut non-metallic flat gasket made from non-asbestos compressed fiber sheet (aramid or mineral fibers with an elastomeric binder), with dimensions per ASME B16.21-2021 for ASME B16.5-2020 class 150 flanges. It is used in water, oils, and general services compatible with the sheet; common commercial thicknesses are 1.6 mm (1/16") and 3.2 mm (1/8").
| Characteristic | Specification |
|---|---|
| Gasket type | Non-metallic flat; ring (covers the raised face, inside the studs) or full-face with bolt holes, per ASME B16.21-2021 |
| Dimensional standard | ASME B16.21-2021 (Nonmetallic Flat Gaskets for Pipe Flanges) |
| Mating flanges | ASME B16.5-2020 class 150 |
| Material | Non-asbestos compressed fiber sheet with elastomeric binder — sheet brand and grade per availability, confirmed when quoting |
| Common thicknesses | 1.6 mm (1/16") and 3.2 mm (1/8") |
| Pressure-temperature limits | Depend on the manufacturer’s specific sheet — confirmed with the data sheet when quoting; we do not publish a single limit |
| Sale | Per unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
| Nominal diameter | Presentation |
|---|---|
| 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4", 6" | Per unit |
| 8" | Per unit — on request |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this class 150 compressed fiber gasket indicating diameter, thickness, fluid, and quantity to confirm availability and price.
The price depends on diameter, thickness (1.6 or 3.2 mm), sheet, and quantity. TECTUL quotes per unit with the actual fluid and temperature.
The ring gasket covers only the raised face and sits inside the studs; the full-face gasket covers the whole flange and carries bolt holes. Both are dimensioned in ASME B16.21-2021.
Compressed fiber is a non-metallic flat gasket for class 150 general services; the spiral wound gasket is semi-metallic (ASME B16.20) and is used with higher pressure, temperature, or thermal cycling.
Limits depend on the manufacturer’s specific sheet and on the pressure-temperature combination; there is no single limit for the type. TECTUL confirms the sheet data sheet when quoting.
With clean flange faces, a centered gasket, and crossed tightening in stages up to the procedure torque; without reusing already-compressed gaskets.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Anti-Vibration Joint
Neoprene Gasket
Viton Gasket
Spiral Wound Gasket 150 Pounds ✔️ Certificates
Washbasin GasketUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
