Anti-Vibration Joint is a product in the gaskets & seals family for fluid conduction in rubber. 6 sizes published with per-variant price and availability. Price from $ 200.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-86910-01 | 1-1/2" | $ 200.600 | Made to order | ||
| VT-86910-02 | 2" | $ 200.600 | In stock | ||
| VT-86910-03 | 2-1/2" | $ 200.600 | In stock | ||
| VT-86910-04 | 3" | $ 200.600 | In stock | ||
| VT-86910-05 | 4" | $ 200.600 | In stock | ||
| VT-86910-06 | 6" | $ 200.600 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Gaskets & seals |
| Material | Caucho |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
Flanged Anti-Vibration Joint is a TECTUL reference for flexible connections in pumps, hydraulic networks and equipment that transmits vibration to the piping. It is purchased by size, presentation and real compatibility with the fluid, not only by commercial name. The base material is rubber and the key difference versus nearby products is its flexible body to absorb movement, different from a flat gasket that only seals between flanges. When the project requires a public standard, certificate or traceability, the technical data sheet must be confirmed before purchase. To quote correctly, it is useful to report nominal size, quantity, equipment where it will be installed, fluid, qualitative operating temperature, type of joint and whether the project requires a certificate or technical data sheet. We do not publish a single maximum pressure because performance depends on flange, thread, surface preparation, tightening, curing, storage, temperature, chemical compatibility and commissioning test.
| Actual reported size | Presentation |
|---|---|
| 1-1/2" | Sold by units (Unid.) |
| 2" | Sold by units (Unid.) |
| 2-1/2" | Sold by units (Unid.) |
| 3" | Sold by units (Unid.) |
| 4" | Sold by units (Unid.) |
| 6" | Sold by units (Unid.) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this flanged anti-vibration joint indicating size, quantity, application and certificate requirements to confirm availability and price.
The price depends on size, presentation, material, quantity and availability. TECTUL quotes with the real application to avoid reference errors.
The anti-vibration joint compensates vibration and small movements; the neoprene gasket is a flat sealing gasket and does not replace a flexible element.
Install the joint aligned between flanges, without torsion or stretching, and use bolts with cross-pattern tightening so the rubber is not deformed.
Send size, quantity, material, fluid, photo if it is a replacement, equipment type and whether you need a certificate or technical data sheet.
No. Compatibility depends on material, seal, adhesive, electrode, flange, thread and system operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other Colombian cities according to availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Neoprene Gasket
Viton Gasket
Garlock Gasket 150 Pounds
Spiral Wound Gasket 150 Pounds ✔️ Certificates
Washbasin GasketUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
