A/B Series 2-Piece Pneumatic Maintenance Unit - FRL is a product in the pneumatic components family for fluid conduction. 2 sizes published with per-variant price and availability. Price from $ 72.800 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-283569-01 | 1/4" Mini | $ 72.800 | In stock | ||
| VT-283569-02 | 1/2" | $ 72.800 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pneumatic components |
| Connection | Other |
| Availability | In stock |
A/B Series 2-Piece Pneumatic Maintenance Unit is a TECTUL product for preparing compressed air through filtration and regulation in compact stations, small machines, or network branches that use the A/B Series family. It is selected by connection size, function within air treatment, compatibility with existing equipment, and expected maintenance. Its material or base construction is handled as components for compressed air; material to be confirmed on the data sheet. It is distinguished by its A/B Series two-piece configuration and reported sizes, different from the JA Series unit by family and from the three-piece FRL by absence of lubricator. This lot does not report a closed dimensional standard or complete material for all components; therefore selection must be confirmed with the technical data sheet, fluid, connection, and actual operating conditions. For an accurate quote, provide size, quantity, compressor or network type, installation point, approximate equipment consumption, required air quality, and whether it replaces an existing reference. We do not publish a single maximum pressure because performance depends on the manufacturer's design, temperature, flow rate, lubrication, vibration, mounting, and accessories installed upstream and downstream.
| Reported actual size | Presentation |
|---|---|
| 1/4" Mini | Confirm when quoting |
| 1/2" | Confirm when quoting |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this A/B Series 2-piece pneumatic maintenance unit indicating size, quantity, application, city, and whether you need to replace an installed reference.
The price depends on size, series, quantity, availability, and accessories such as pressure gauge, bracket, coupling, or spare part. TECTUL quotes with the actual installation data.
Both are two-piece units, but they belong to different series. The A/B Series must be kept when the mounting, spare parts, or equipment dimensions match that family.
Install it in vertical position, upstream of the equipment, with accessible drain and without transferring pipe weight to the assembly body.
Send connection size, quantity, photo of the reference if it is a replacement, application, dispatch city, and whether the line requires filtration, regulation, or lubrication.
No. Flow rate, system working pressure, air quality, humidity, temperature, vibration, connection, and compatibility with the pneumatic equipment must be validated.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other cities in Colombia according to availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Series A/B Air Regulator
3-Part Pneumatic Maintenance Unit - FRL Series JA
Pneumatic Air Filter Series A/B
Air Filter Regulator Series A/B
Red Pneumatic Air Blow GunUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
