Carbon Steel Pipe Sch160 Seamless is a product in the pipe & tubing family for fluid conduction in carbon steel. 10 sizes published with per-variant price and availability. Price from $ 119.908 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-tubo-acero-carbon-sch160-01 | 1/2" | $ 119.908 | Made to order | ||
| VT-tubo-acero-carbon-sch160-02 | 3/4" | $ 175.385 | Made to order | ||
| VT-tubo-acero-carbon-sch160-03 | 1" | $ 245.169 | Made to order | ||
| VT-tubo-acero-carbon-sch160-04 | 1-1/4" | $ 320.954 | Made to order | ||
| VT-tubo-acero-carbon-sch160-05 | 1-1/2" | $ 390.462 | Made to order | ||
| VT-tubo-acero-carbon-sch160-06 | 2" | $ 583.385 | Made to order | ||
| VT-tubo-acero-carbon-sch160-07 | 3" | $ 1.137.600 | Made to order | ||
| VT-tubo-acero-carbon-sch160-08 | 4" | $ 1.791.138 | Made to order | ||
| VT-tubo-acero-carbon-sch160-09 | 6" | $ 3.598.708 | Made to order | ||
| VT-tubo-acero-carbon-sch160-10 | 8" | $ 5.869.108 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe & tubing |
| Material | Acero al carbón |
| Connection | Other |
| Sales unit | 6 metros |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
Seamless SCH160 carbon steel pipe is heavy-wall pipe for industrial lines where the design requires greater thickness than SCH80. It is selected by NPS, schedule, material, fluid, temperature, corrosion allowance and piping code; ASME B36.10M defines the schedule dimension and ASTM A106/A106M may apply when seamless pipe is required for temperature service. This page does not compete with general conveyance pipe: its focus is industrial supply for demanding conditions that must be supported by calculation and specification.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for seamless SCH160 with the required standard, diameter, quantity and documentation.
Pick your diameter and service conditions: the calculator estimates the indicative allowable pressure of each schedule so you can compare.
| Schedule | Wall thickness (mm) | Indicative pressure |
|---|
It depends on diameter, standard, availability, quantity and required certificates. TECTUL quotes by project.
SCH160 has greater relative thickness and is reserved for higher demands validated by calculation.
Usually by welding with edge preparation, qualified procedure and fittings compatible with heavy wall.
It may be part of high-demand lines, but allowable pressure is calculated; it is not defined only by SCH160.
ASME B36.10M for carbon steel pipe dimensions by schedule.
It can be quoted with certificates or traceability when lot availability and specification allow it.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Seamless Schedule 40 Carbon Steel Pipe
Schedule 10 Carbon Steel Pipe
Heavy Type Galvanized Schedule 40 Pipe (Conveying)
PP-R Fusion Pipe PN16/RDE 7.4 Domestic Use
Rigid Copper Tube Type LUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
