Polypropylene Fusion Compensation Tube is a product in the pipe & tubing family for fluid conduction in polypropylene. 2 sizes published with per-variant price and availability. Fusion connection. Price from $ 20.200 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59279-01 | 1/2" | Request a quote | Made to order | ||
| VT-59279-02 | 3/4" | Request a quote | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping. Sizes marked with * show the base reference price.
| Family | Pipe & tubing |
| Material | Polipropileno |
| Connection | Fusion |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
The PP fusion compensation tube is a polypropylene system part for absorbing or managing expansion in networks installed by heat fusion. It is not PN16 straight conveyance pipe, but an installation element placed where the layout, temperature and line length require compensation. In PP-R systems, ISO 15874 and NTC 4897 guide selection by material, series and service conditions, but the compensator location must be defined with the network design and the guide of the system used.
| Reported size | Unit | Use |
|---|---|---|
| 1/2" | Unit | Compensation in PP fusion network |
| 1/2" | Unit | Compensation in PP fusion network |
| 3/4" | Unit | Compensation in PP fusion network |
| 3/4" | Unit | Compensation in PP fusion network |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the PP fusion compensation tube with size, quantity and network schematic.
It depends on size, quantity and availability. TECTUL quotes by unit and can complement with PP-R pipe and fittings.
PN16 is straight conveyance pipe; the compensation tube is used to manage expansion at defined points in the network.
It is installed by heat fusion, respecting design location, fixed or sliding supports and freedom of movement of the section.
The lot shows variants in 1/2" and 3/4", sold by unit.
When layout, length and temperature changes generate expansion that must not be transmitted to joints or equipment.
Dimensional and system compatibility must be validated before mixing components.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Seamless Schedule 40 Carbon Steel Pipe
Schedule 10 Carbon Steel Pipe
Heavy Type Galvanized Schedule 40 Pipe (Conveying)
PP-R Fusion Pipe PN16/RDE 7.4 Domestic Use
Rigid Copper Tube Type LUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
