Stainless Steel Pipe Sch80 Seamless is a product in the pipe & tubing family for fluid conduction in stainless steel, SCH 80. 8 sizes published with per-variant price and availability. Price from $ 246.185 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-tubo-inoxidable-sch80-01 | 3/8" | $ 246.185 | Made to order | ||
| VT-tubo-inoxidable-sch80-02 | 1/2" | $ 315.600 | Made to order | ||
| VT-tubo-inoxidable-sch80-03 | 3/4" | $ 410.492 | Made to order | ||
| VT-tubo-inoxidable-sch80-04 | 1" | $ 579.785 | Made to order | ||
| VT-tubo-inoxidable-sch80-05 | 1-1/4" | $ 750.277 | Made to order | ||
| VT-tubo-inoxidable-sch80-06 | 1-1/2" | $ 892.062 | Made to order | ||
| VT-tubo-inoxidable-sch80-07 | 2" | $ 1.213.938 | Made to order | ||
| VT-tubo-inoxidable-sch80-08 | 2-1/2" | $ 1.897.200 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe & tubing |
| Material | Acero inoxidable |
| Standard | SCH 80 |
| Connection | Other |
| Sales unit | 5.8 metros |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
Seamless SCH80 stainless steel pipe combines corrosion-resistant material with greater relative thickness than SCH40, for demanding industrial services defined by calculation. ASME B36.19M is used for stainless steel pipe dimensions by schedule and ASTM A312/A312M may apply to seamless manufacture. It differs from seamless SCH40 by heavier wall, and from SCH10 because it is not oriented to light lines. Selection must consider stainless grade, fluid, temperature, corrosion allowance, joining method and fitting compatibility.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for seamless SCH80 stainless steel pipe with diameter, grade and quantity.
It depends on grade, diameter, quantity, availability and certificates. TECTUL quotes according to the technical requirement.
SCH80 has greater relative thickness and is used when the calculation requires more wall than SCH40.
Usually by welding with bevel preparation, compatible consumables, cleaning control and SCH80 fittings.
No. It is industrial pipe by schedule; for hygienic processes, sanitary stainless steel tube is reviewed.
It should not be handled as a single value. It depends on NPS, thickness, material, temperature, corrosion allowance and code.
The lot data indicates a 5.8-meter presentation for this reference.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Seamless Schedule 40 Carbon Steel Pipe
Schedule 10 Carbon Steel Pipe
Heavy Type Galvanized Schedule 40 Pipe (Conveying)
PP-R Fusion Pipe PN16/RDE 7.4 Domestic Use
Rigid Copper Tube Type LUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
