Carbon Steel Ball Valve 3000 PSI is a product in the valves family for fluid conduction in carbon steel, Clase 3000. 8 sizes published with per-variant price and availability. Price from $ 206.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59180-01 | 1/4" | $ 206.600 | In stock | ||
| VT-59180-02 | 3/8" | $ 206.600 | Made to order | ||
| VT-59180-03 | 1/2" | $ 206.600 | In stock | ||
| VT-59180-04 | 3/4" | $ 206.600 | In stock | ||
| VT-59180-05 | 1" | $ 206.600 | In stock | ||
| VT-59180-06 | 1-1/4" | $ 206.600 | Made to order | ||
| VT-59180-07 | 1-1/2" | $ 206.600 | In stock | ||
| VT-59180-08 | 2" | $ 206.600 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Valves |
| Material | Acero al carbón |
| Standard | Clase 3000 |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
TECTUL carbon steel ball valve class 3000 is a solution for manual isolation in industrial lines compatible with carbon steel. It is purchased by size, material, connection and actuation type, because those four data points define whether the valve integrates correctly into the network and whether maintenance will be practical. In this product the key attribute is carbon steel; its design class separates it from light ball valves; final selection must validate fluid, temperature, thread and actual conditions. For an industrial purchase, confirm the fluid, nominal diameter, mounting position, operating frequency and nearby accessories before quoting. This avoids ordering a similar but non-equivalent valve within the same fluid-conveying family.
| Size / reference | Presentation | Observation |
|---|---|---|
| 1/4" | Sold by units (Unit) | Actual TECTUL catalog data |
| 3/8" | Sold by units (Unit) | Actual TECTUL catalog data |
| 1/2" | Sold by units (Unit) | Actual TECTUL catalog data |
| 3/4" | Sold by units (Unit) | Actual TECTUL catalog data |
| 1" | Sold by units (Unit) | Actual TECTUL catalog data |
| 1-1/4" | Sold by units (Unit) | Actual TECTUL catalog data |
| 1-1/2" | Sold by units (Unit) | Actual TECTUL catalog data |
| 2" | Sold by units (Unit) | Actual TECTUL catalog data |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your carbon steel ball valve class 3000 with size, fluid, connection and quantity to receive a technical recommendation from TECTUL.
The price depends on size, material, connection, quantity and availability. Send us the reference or size (1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2") and TECTUL will quote via WhatsApp.
Compared with the carbon steel ball valve 1000 psi, this version is oriented to higher nominal-demand applications and a smaller available size range.
Verify thread compatibility, support the pipe so it does not load the body and do not use it to throttle flow continuously.
The actual sizes registered for this lot are: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2". If you need equivalence with an existing connection, share a photo of the nameplate, thread or mounting.
No. Chemical compatibility, temperature, system working pressure, seal type and applicable standard must be validated before installation.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and all of Colombia, with unit quotes and support to select the right reference.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
