Napoli Bronze Ball Valve is a product in the valves family for fluid conduction in bronze. 11 sizes published with per-variant price and availability. Price from $ 12.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59187-01 | 1/4" | $ 12.600 | In stock | ||
| VT-59187-02 | 3/8" | $ 12.600 | In stock | ||
| VT-59187-03 | 1/2" | $ 12.600 | In stock | ||
| VT-59187-04 | 3/4" | $ 12.600 | In stock | ||
| VT-59187-05 | 1" | $ 12.600 | In stock | ||
| VT-59187-06 | 1-1/4" | $ 12.600 | In stock | ||
| VT-59187-07 | 1-1/2" | $ 12.600 | In stock | ||
| VT-59187-08 | 2" | $ 12.600 | In stock | ||
| VT-59187-09 | 2-1/2" | $ 12.600 | In stock | ||
| VT-59187-10 | 3" | $ 12.600 | In stock | ||
| VT-59187-11 | 4" | $ 12.600 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Valves |
| Material | Bronce |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
TECTUL threaded bronze ball valve is a manual shut-off solution for water, air and general service networks. It is purchased by size, material, connection and actuation method, because those four data define whether the valve integrates correctly into the network and whether maintenance will be practical. In this product the key attribute is bronze; it differs from the bronze gate valve because it works as a quarter-turn shut-off, useful when quick opening or closing is needed without regulating flow. For an industrial purchase, it is advisable to confirm the fluid, nominal diameter, mounting position, operating frequency and nearby fittings before quoting. This avoids requesting a similar but non-equivalent valve within the same fluid conveyance family.
| Size / reference | Presentation | Observation |
|---|---|---|
| 1/4" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 3/8" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 1/2" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 3/4" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 1" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 1-1/4" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 1-1/2" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 2" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 2-1/2" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 3" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
| 4" | Sold by units (Unid.) | Actual data from the TECTUL catalog |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your threaded bronze ball valve with size, fluid, connection and quantity to receive a technical recommendation from TECTUL.
The price depends on size, material, connection, quantity and availability. Send us the reference or size (1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4") and TECTUL will quote you via WhatsApp.
The bronze gate valve is preferable for isolation in lines where frequent actuation is avoided; the bronze ball valve is convenient when the operator needs quick operation and direct passage.
Install it respecting the practical operating direction of the handle, with compatible sealant on the thread and without using the handle as a leverage point.
The actual sizes registered for this lot are: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4". If you need equivalence with an existing connection, share a photo of the nameplate, thread or assembly.
No. Chemical compatibility, temperature, system working pressure, seal type and applicable standard must be validated before installation.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and all of Colombia, with quotation by unit and support to select the suitable reference.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
