Polypropylene Fusion Ball Valve for Hot Fluid is a product in the valves family for fluid conduction in polypropylene. 14 sizes published with per-variant price and availability. Fusion connection. Price from $ 22.800 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59192-01 | 20 mm | $ 22.800 | In stock | ||
| VT-59192-02 | 25 mm | $ 22.800 | In stock | ||
| VT-59192-03 | 32 mm | $ 22.800 | In stock | ||
| VT-59192-04 | 40 mm | $ 22.800 | In stock | ||
| VT-59192-05 | 50 mm | $ 22.800 | In stock | ||
| VT-59192-06 | 20 mm | $ 22.800 | In stock | ||
| VT-59192-07 | 25 mm | $ 22.800 | In stock | ||
| VT-59192-08 | 32 mm | $ 22.800 | In stock | ||
| VT-59192-09 | 40 mm | $ 22.800 | In stock | ||
| VT-59192-10 | 50 mm | $ 22.800 | In stock | ||
| VT-59192-11 | 20 mm | $ 22.800 | Made to order | ||
| VT-59192-12 | 25 mm | $ 22.800 | Made to order | ||
| VT-59192-13 | 32 mm | $ 22.800 | Made to order | ||
| VT-59192-14 | 40 mm | $ 22.800 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Valves |
| Material | Polipropileno |
| Connection | Fusion |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
Polypropylene fusion ball valve for hot fluid is a TECTUL fluid conveyance reference designed to open and close PP-R networks for hot water or compatible thermal service according to the installation design. It is selected by size, connection, material, fluid compatibility, mounting orientation and function within the system. In this product the main material or assembly is polypropylene and the technical purchase criterion is a compatible heat-fusion system. It differs from the cold-fluid version by its red handle identification and expected thermal application. For an accurate quote, it is advisable to indicate the actual fluid, size, quantity, connection type and whether the product will work as shut-off, check, regulation, relief, automation, irrigation, protection or terminal point. This page is written for industrial buyers who need to compare the correct reference before installation, avoid substitutions by appearance and request technical support with concrete data.
| Actual reported size | Presentation |
|---|---|
| 20 mm | Sold by units (Unid.) |
| 25 mm | Sold by units (Unid.) |
| 32 mm | Sold by units (Unid.) |
| 40 mm | Sold by units (Unid.) |
| 50 mm | Sold by units (Unid.) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this reference, indicating size, quantity, fluid and connection type to confirm availability and price.
The price depends on size, material, connection, quantity and availability. Send us the fluid and application to quote the correct reference at TECTUL.
The cold-fluid valve is identified for cold water networks; the red-handle version is quoted when the PP-R system corresponds to hot fluid.
Use clean heat-fusion dies, control alignment and do not rotate the valve after inserting the hot joint.
Indicate size, quantity, fluid, connection, temperature or service condition, and whether the part will work as shut-off, check, regulation, relief or automation.
No. Compatibility depends on the body, seals, gaskets, temperature, fluid cleanliness and actual operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polypropylene Fusion Ball Valve Cold Fluid
Polypropylene Yee Check Valve
Ball Valve with Polypropylene Fusion Male Thread Adapter / Brass
Ball Valve with Polypropylene Fusion / Brass Adapter
Ball Valve with Female Thread Adapter Polypropylene FusionUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
