22 mm metal or plastic pushbutton, flush or projecting, NO/NC, for pushbutton stations and control panels. Colors and contacts as required.
Tell us the reference or key specification (current, power, gauge, size), quantity and city — a technical advisor sends your quote the same business day.
The 22 mm industrial pushbutton is a control device per IEC 60947-5-1 mounted in the standard 22.5 mm hole. It takes NO/NC contact blocks rated AC-15, and its color is assigned by function per IEC 60073: red to stop, green to start.
The 22 mm industrial pushbutton is a command element for panels, pushbutton stations and control panels where an order must be sent to the circuit: start, operational stop, reset, enable or auxiliary signal. At TECTUL it is quoted by industrial line in metal or plastic body, flush or projecting type, with NO/NC contacts and colors according to the panel function. It differs from a 2- and 3-position selector because the pushbutton is used for a specific operator action, while the selector maintains or switches states. It also differs from a mushroom-head emergency stop because it does not replace an emergency function if the risk analysis requires latching, identification and safety architecture. To select it correctly, the 22 mm diameter, contact type, control-circuit voltage and equipment logic must be confirmed.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your 22 mm industrial pushbutton indicating color, material and contacts.
| Color | Control function |
|---|---|
| Red | Stop, off, emergency |
| Green | Start, run |
| Yellow | Intervention on abnormal condition |
| Blue | Reset function |
| White / black | No assigned meaning: general functions |
Color assignment per IEC 60073. Contacts are specified in category AC-15 of IEC 60947-5-1 (switching AC electromagnet loads such as contactor coils), with metal or plastic bodies, flush or extended heads.
The price changes by material, color, button type and NO/NC contacts. TECTUL quotes via WhatsApp according to quantity and configuration.
The pushbutton sends an order to the circuit when actuated. The LED pilot light only indicates an electrical or process state in the panel.
Yes. The lot allows quoting a metal or plastic pushbutton, according to the environment, mechanical requirement and project budget.
Yes, it is quoted with normally open, normally closed or combined contact, according to the control circuit.
It is mounted in a 22 mm hole, the actuator is fixed, the contact block is coupled and it is connected to the circuit with the panel de-energized.
Send quantity, color, metal or plastic, flush or projecting, required contacts and panel application.
It is the IEC 60947-5-1 utilization category for switching AC electromagnetic loads — contactor coils and solenoid valves — which is the real duty of a panel pushbutton.
Flush for normal functions, since it prevents accidental operation; extended (or mushroom type) where fast or gloved operation matters, such as reverse or stop commands.
Updated: July 22, 2026
