Short or long handle selector switch, 2 or 3 positions, maintained or spring-return, with configurable contacts for circuit control.
Tell us the reference or key specification (current, power, gauge, size), quantity and city — a technical advisor sends your quote the same business day.
The 2- or 3-position selector switch is a control device per IEC 60947-5-1 for switching operating modes — for example hand-off-auto — in the standard 22.5 mm hole. It is configured with maintained or spring-return positions, short, long or key handle, and NO/NC contact blocks per the control logic.
The 2- and 3-position selector switch is a command device for industrial panels, pushbutton stations and control stations where the operator must choose a mode, enable a function or switch a control signal. At TECTUL it is quoted by industrial line according to the required configuration: short or long handle, two or three positions, maintained or spring-return operation, and NO/NC contact blocks according to the circuit. It differs from an industrial pushbutton because it is not intended for a simple momentary command, but to maintain or select operating states such as manual, automatic, forward, reverse, local or remote. For machinery and control projects, selection must be validated against the electrical diagram, control-circuit voltage and safety logic defined by the designer.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your 2- and 3-position selector switch indicating positions, return and required contacts.
| Configuration | Use |
|---|---|
| 2 maintained positions | ON/OFF, local/remote |
| 3 maintained positions | Hand – off – auto |
| 2 or 3 positions with spring return | Momentary command returning to center |
| Key handle | Restricts mode changes to authorized personnel |
Control devices per IEC 60947-5-1 with AC-15 rated contacts. The number of NO/NC blocks and the cam scheme define which contact closes in each position.
We do not publish invented prices because they change according to number of positions, return type, handle and contact blocks. TECTUL quotes it via WhatsApp.
The selector switch is used to choose or maintain command states; the pushbutton gives a momentary or latching order according to its design. If you need to choose manual/automatic mode, a selector is normally required.
Yes. It is quoted with configurable contacts according to the control diagram, for example for enable signals, interlocking or switching.
Yes, it is intended for panels, pushbutton stations and command stations. Mechanical and electrical compatibility with the enclosure and circuit must be verified.
It is mounted in the panel hole, mechanically secured and then the contact blocks are assembled. Connection must be performed by competent personnel with the panel de-energized.
Send quantity, 2 or 3 positions, maintained or spring-return, handle type, required contacts and control-circuit voltage if applicable.
Maintained when the mode must stay selected (hand/auto); spring return when the command is momentary, such as a test or reset impulse that must not stay latched.
A selector whose handle is a lock: only the key holder can change position, and the key can be removed in a defined position to lock the mode — common for maintenance modes.
Updated: July 22, 2026
