3/8 Long Driveshaft Clamp

The 3/8 long driveshaft clamp is a U clamp for driveshaft fastening when the assembly requires nominal diameter 3/8 and greater useful length than the short version. At TECTUL it is sold by unit, in carbon steel and with inch thread. Its use is concentrated in driveshaft replacement, work machinery, industrial maintenance and assemblies where the buyer needs to keep the original diameter while gaining thread reach. The key difference from the 3/8 short driveshaft clamp is length: the long version is chosen when the housing or the part to be fastened requires more travel; if space is limited, the short version may be more suitable. Compared with the 5/16 long, this reference has a larger diameter, so they are not interchangeable without validating the mechanical assembly. To avoid errors, confirm diameter, long version and nut compatibility before purchasing.

Selection guide

• Choose this clamp if the assembly requires 3/8 diameter and long version.
• If the length creates interference, validate the 3/8 short driveshaft clamp.
• Do not select by visual similarity: confirm diameter and thread with the original part.
• For maintenance, request the reference together with quantity and dispatch city.

Installation recommendations

• Check that the threads are clean and that the nuts enter without binding.
• Present the clamp dry before tightening to validate alignment and free space.
• Tighten both ends alternately, avoiding loading only one side.
• Do not bend the clamp to adjust the position; change to the correct reference.
• Perform a final visual check of the assembly before putting it into operation.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the 3/8 long driveshaft clamp with the required quantity and shipping data.