Bridge Clamp Plate 1 Week Bridge Clamp in carbon steel, inch thread. 4 sizes available; sold by unit.
| SKU | Size | Price | Status | Qty | |
|---|---|---|---|---|---|
| VT-49511 | 1/2 X 1.3/4 | $ 2.719 | In stock | ||
| VT-49512 | 1/2 X 2 | $ 3.038 | In stock | ||
| VT-49513 | 1/2 X 2.1/2 | $ 3.358 | In stock | ||
| VT-49515 | 1/2 X 3 | $ 3.840 | In stock |
Prices per unit, before VAT. Availability is confirmed in the formal quote.
| Material | acero al carbono |
| Thread system | pulgadas |
| Family | Nails & staples |
The bridge clamp plate 1 week is the support component that works with the bridge-type clamp to hold, close or back up a mechanical assembly where a simple and replaceable metal base is required. At TECTUL it is supplied in carbon steel, sold by unit, with an inch thread reference and actual sizes available for selection according to the diameter and length of the clamp it will accompany. Unlike the driveshaft clamps in this same family, this page corresponds to the bridge clamp plate: it is not a U clamp for a universal joint or driveshaft, but the flat part that complements the fastening. It is a practical option for industrial maintenance, hardware replacement, metalworking fabrication and fastener purchasing where the buyer needs to identify the size quickly before quoting.
| Material | Thread standard or reference | Sales unit | Available size |
|---|---|---|---|
| Carbon steel | Inch thread | Unit | 1/2 X 1.3/4 |
| Carbon steel | Inch thread | Unit | 1/2 X 2 |
| Carbon steel | Inch thread | Unit | 1/2 X 2.1/2 |
| Carbon steel | Inch thread | Unit | 1/2 X 3 |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the bridge clamp plate 1 week indicating size, quantity and application to receive a precise technical and commercial response.
The price depends on the size and requested quantity. Request a quote via WhatsApp indicating whether you need 1/2 X 1.3/4, 1/2 X 2, 1/2 X 2.1/2 or 1/2 X 3.
The bridge clamp plate is a flat support part for a bridge-type clamp. The driveshaft clamp is a U clamp used in driveshaft assemblies; they do not perform the same function.
It is installed aligned with the clamp and the element to be fastened, using compatible nuts and washers. The surface must remain flat so tightening is uniform.
According to TECTUL's actual lot, this plate is supplied in carbon steel.
The sales unit registered for this product is unit. For volume purchases, request a quotation.
Send the exact size, quantity, destination city and a photo or reference of the assembly if you are replacing an existing part.
Updated: July 22, 2026
