Stainless Steel Bimetal Dial Thermometer is a product in the instrumentation family for fluid conduction in stainless steel, ASME B40.200. 6 sizes published with per-variant price and availability. Price from $ 65.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-SER-TER-BIM-01 | 2" · vástago fijo · trasera 1/4" NPT | $ 65.600 * | In stock | ||
| VT-SER-TER-BIM-02 | 3" · escualizable (ajustable) · trasera 1/2" NPT | $ 65.600 * | In stock | ||
| VT-SER-TER-BIM-03 | 3" · vástago fijo · trasera 1/2" NPT | $ 65.600 * | In stock | ||
| VT-SER-TER-BIM-04 | 4" · vástago fijo · conexión según requerimiento | Request a quote | Made to order | ||
| VT-SER-TER-BIM-05 | 5" · escualizable (ajustable) · trasera 1/2" NPT | $ 65.600 * | Made to order | ||
| VT-SER-TER-BIM-06 | 5" · vástago fijo · trasera 1/2" NPT | Request a quote | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping. Sizes marked with * show the base reference price.
| Family | Instrumentation |
| Material | Acero inoxidable |
| Standard | ASME B40.200 |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
A bimetal thermometer converts the expansion of a two-metal coil into needle rotation: it measures temperature with no power supply or capillaries. Series with stainless steel case and stem for industrial processes, corrosive media and sanitary industry, with fixed or adjustable-angle stem (the head swivels and tilts to face the reading point), back connection in 1/4" and 1/2" NPT.
| Dial | Diameter (mm) | Stem | NPT thread | Price |
|---|---|---|---|---|
| 2" | 50.8 | fixed | 1/4" | COP $65,600 — in stock |
| 3" | 76.2 | fixed | 1/2" | COP $76,300 — in stock |
| 5" | 127.0 | fixed | 1/2" | quote — in stock |
| 3" | 76.2 | adjustable-angle | 1/2" | COP $181,800 — in stock |
| 5" | 127.0 | adjustable-angle | 1/2" | COP $258,600 — made to order |
| 4" | 101.6 | fixed | per requirement | on request |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
The temperature range per variant is confirmed at quotation: the source data sheets do not publish it. Prices before VAT.
The reference standard for direct-reading thermometers is ASME B40.200 (Thermometers, Direct Reading and Remote Reading).
On pressurized lines or tanks the thermometer is installed inside a threaded stainless steel thermowell, which allows removing it without depressurizing the process.
It is the bimetal thermometer with an adjustable stem: the head swivels and tilts to aim the dial at the reading point regardless of mounting angle. This series offers 3" (COP $181,800, in stock) and 5" (COP $258,600, made to order) adjustable versions.
On pressurized lines or tanks, yes: the threaded thermowell isolates the stem from the fluid and allows removing the thermometer without depressurizing or draining the line.
The range is confirmed at quotation according to your process, because the source data sheets do not publish a per-variant range; state operating temperature and required stem length when requesting a quote.
The 2" and 3" dials for in-line mounting and short spaces; the 5" when reading from a distance. The 4" dial — the most imported size in the Colombian market — is supplied on request.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Glycerin-Filled Stainless Steel Pressure Gauge
Black Case Dry Pressure Gauge, Brass Internals
Calibratable Dry Stainless Steel Pressure Gauge
Dry-Damped Stabilizer Pressure Gauge
Low-Pressure Capsule Gauge, in H2O ScaleUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
