Spiral Wound Gasket Class 1500 ✔️ Certified is a product in the gaskets & seals family for fluid conduction in 316 stainless steel. 10 sizes published with per-variant price and availability. Price from $ 8.050 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-118941-01 | 3/4" | $ 8.050 | In stock | ||
| VT-118941-02 | 1" | $ 8.050 | In stock | ||
| VT-118941-03 | 1-1/2" | $ 8.050 | In stock | ||
| VT-118941-04 | 2" | $ 8.050 | In stock | ||
| VT-118941-05 | 3" | $ 8.050 | In stock | ||
| VT-118941-06 | 4" | $ 8.050 | In stock | ||
| VT-118941-07 | 6" | $ 8.050 | In stock | ||
| VT-118941-08 | 8" | $ 8.050 | In stock | ||
| VT-118941-09 | 10" | $ 8.050 | In stock | ||
| VT-118941-10 | 12" | $ 8.050 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Gaskets & seals |
| Material | Acero inoxidable 316 |
| Connection | Other |
| Availability | In stock |
Certified Class 1500 Spiral Wound Gasket is a TECTUL reference for sealing class 1500 flanges in industrial services defined by engineering. It is purchased by size, presentation, and actual compatibility with the fluid, not only by trade name. The base material is stainless steel 316 with compatible filler, and the key difference from related products is its class 1500, different from classes 150, 300, and 600 in the family. The reference is selected under ASME B16.20 criteria for spiral wound gaskets when the project requests it. To quote correctly, it is useful to report nominal size, quantity, equipment where it will be installed, fluid, qualitative operating temperature, joint type, and whether the project requires a certificate or technical data sheet. We do not publish one maximum pressure because performance depends on flange, thread, surface preparation, tightening, curing, storage, temperature, chemical compatibility, and commissioning test.
| Reported actual size | Presentation |
|---|---|
| 3/4" | Confirm when quoting |
| 1" | Confirm when quoting |
| 1-1/2" | Confirm when quoting |
| 2" | Confirm when quoting |
| 3" | Confirm when quoting |
| 4" | Confirm when quoting |
| 6" | Confirm when quoting |
| 8" | Confirm when quoting |
| 10" | Confirm when quoting |
| 12" | Confirm when quoting |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this certified class 1500 spiral wound gasket, indicating size, quantity, application, and certificate requirements to confirm availability and price.
The price depends on size, presentation, material, quantity, and availability. TECTUL quotes with the actual application to avoid reference errors.
Class 1500 uses specific dimensions and flanges; it is not replaced by class 600 or lower even if the nominal diameter appears similar.
Confirm ASME B16.20, class, diameter, and material; install with aligned flanges and tightening controlled by the project procedure.
Send size, quantity, material, fluid, photo if it is a replacement, equipment type, and whether you need a certificate or technical data sheet.
No. Compatibility depends on material, seal, adhesive, electrode, flange, thread, and system operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Anti-Vibration Joint
Neoprene Gasket
Viton Gasket
Garlock Gasket 150 Pounds
Spiral Wound Gasket 150 Pounds ✔️ CertificatesUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
