Oval Ring RTJ (R) Gasket ✔️ Certified is a product in the gaskets & seals family for fluid conduction in 316 stainless steel. Available in stock, quoted via WhatsApp. Price from $ 19.500 COP before VAT.
| Family | Gaskets & seals |
| Material | Acero inoxidable 316 |
| Connection | Other |
| Availability | In stock |
Certified Type R Ring Joint Gasket is a TECTUL reference for sealing flanges with RTJ grooves in industrial services specified by engineering. It is purchased by size, presentation, and actual compatibility with the fluid, not only by trade name. The base material is stainless steel 316, and the key difference from related products is its oval type R profile, different from RX and BX in the RTJ family. The reference is validated against ASME B16.20 or API 6A RTJ grooves when the project requires it. To quote correctly, it is useful to report nominal size, quantity, equipment where it will be installed, fluid, qualitative operating temperature, joint type, and whether the project requires a certificate or technical data sheet. We do not publish one maximum pressure because performance depends on flange, thread, surface preparation, tightening, curing, storage, temperature, chemical compatibility, and commissioning test.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this certified type r ring joint gasket, indicating size, quantity, application, and certificate requirements to confirm availability and price.
The price depends on size, presentation, material, quantity, and availability. TECTUL quotes with the actual application to avoid reference errors.
Type R uses a different RTJ ring geometry; RX and BX belong to other grooves and must not be interchanged.
Clean the RTJ groove, confirm ring type and groove number, install without impacts, and tighten with a controlled procedure.
Send size, quantity, material, fluid, photo if it is a replacement, equipment type, and whether you need a certificate or technical data sheet.
No. Compatibility depends on material, seal, adhesive, electrode, flange, thread, and system operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Anti-Vibration Joint
Neoprene Gasket
Viton Gasket
Garlock Gasket 150 Pounds
Spiral Wound Gasket 150 Pounds ✔️ CertificatesUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
