Teadit Gasket 150 lb

Fiber gasket for class 150 flange is a flat gasket cut from compressed fiber sheet to seal flanged joints in compatible services. TECTUL guides buyers who need a flat alternative for class 150 flanges, with selection by diameter, fluid, qualitative temperature, face finish, and chemical compatibility. It differs from the class 150 spiral wound gasket because it has no metal spiral or the same recovery behavior; it also differs from neoprene because compressed fiber works as an industrial flat gasket material, not as a soft general-purpose elastomer. When the project requires material classification, it can be reviewed against ASTM F104 criteria for nonmetallic gasket materials. To quote, send nominal size, flange class, required thickness if you have it, quantity, and fluid.

Selection guide

• Confirm that the flange is class 150 and that the service is compatible with compressed fiber.
• Indicate whether you need a full-face gasket, raised face, special design, or cut from a sample.
• Send fluid, qualitative temperature, and operating condition to review compatibility.
• If the project has a drawing or specification, attach it before approving the purchase.

Installation recommendations

• Clean flange faces and remove remnants of previous gaskets without scratching the sealing surface.
• Center the gasket and prevent it from invading the pipe bore.
• Do not reuse a fiber gasket that has already been compressed or removed from service.
• Tighten bolts in a cross sequence, in stages, and without overloading one side.
• Check for leaks after the initial test and before thermally insulating the joint.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your fiber gasket for class 150 flange, indicating size, quantity, fluid, and flange type.