Self-Aligning Ball Bearing Series 1200/2200 groups 2 references for radial load on rotating shafts. It spans d 35 to 65 mm. Available in SKF. Nominal dimensions per ISO 15 · ABMA 20. No online price: quoted via WhatsApp with the exact reference.
Pick your references in the table (Add) or send us the exact designation with its suffixes — a technical advisor confirms brand, price and lead time the same business day.
| Reference | Brand | d (mm) | D (mm) | B (mm) | Qty | ||
|---|---|---|---|---|---|---|---|
| 1207 E TN9 | SKF | 35 | 72 | 17 | |||
| 1213 EKTN9 | — | 65 | 120 | 23 |
“—” = dimension being verified against manufacturer tables. Nominal values; they are not a batch certificate. Availability is confirmed in the formal quote.
Self-Aligning Ball Bearing Series 1200/2200 is a TECTUL series sheet for quoting self-aligning ball bearing references under ISO 15 dimensional standard. It is intended for long shafts, fans, transmissions, equipment with shaft deflection or supports where moderate angular misalignment may appear between shaft and housing. Selection must not be made only by series number: bore diameter, outside diameter, width, seal or shield type, internal clearance, lubrication, speed, load and operating environment must also be confirmed. The key difference is that it uses a double row of balls and a spherical outer raceway, unlike a deep groove ball bearing, which requires better assembly alignment. In this sheet you can quote real series references such as 1213 EKTN9 and 1207 E TN9, as well as other sizes available by reference. The available lot is quoted by reference, with 2 registered references and an actual bore range d 35-65 mm.
| Lot technical data | Actual value |
|---|---|
| Covered series | autoalineable-1200/2200 |
| Dimensional standard | ISO 15 |
| Available references | 2 |
| Reported dimensional range | d 35-65 mm |
| Top requested references | 1213 EKTN9, 1207 E TN9 |
| Quotation unit | quote by reference |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this series 1200/2200 self-aligning ball bearing, indicating exact reference, quantity, required seal and application to confirm availability and price.
The price depends on the exact reference, seal or shield, internal clearance, quantity and availability. TECTUL does not publish fixed prices; we quote via WhatsApp with the equipment data.
The self-aligning type tolerates angular misalignment better because of its internal geometry. The series 6200 deep groove bearing is more common for well-aligned housings and must not be used to compensate for mounting errors.
Align supports and shaft before final tightening; self-alignment helps, but it does not correct twisted bases, bent shafts or poorly machined housings.
In this lot, 1213 EKTN9 and 1207 E TN9 appear as highlighted references. If you need one of them, send the complete reference to quote it within this series sheet.
They are commercial suffixes associated with the bearing side-protection type. They should not be changed without checking contamination, friction, lubrication and equipment temperature.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
2Z = steel shield on both sides · 2RS/2RSH = rubber contact seal on both sides · C3 = radial internal clearance greater than normal (thermal expansion) · K = tapered bore. No online price: brand, availability and lead time are confirmed in the formal quote.