Ball Bearing Series 6100/6400/6800/6900

Ball Bearing Series 6100/6400/6700/6800/6900 is a TECTUL series sheet for quoting special dimensional-series ball bearing references under ISO 15 dimensional standard. It is intended for applications where the drawing, original spare part or housing requires a specific series different from the 6000, 6200 or 6300 families. Selection must not be made only by series number: bore diameter, outside diameter, width, seal or shield type, internal clearance, lubrication, speed, load and operating environment must also be confirmed. The key difference is that it groups special series with thin or heavy geometries depending on the reference; it is not a generic ball bearing page. In this sheet you can quote real series references such as 6407, 6405, 618, 61804-2RSR and 61910-2RS1, as well as other sizes available by reference. The available lot is quoted by reference, with 19 registered references and an actual bore range d 10-80 mm.

Mounting recommendations

• Do not replace a thin series with a heavy one, or the reverse, without checking width, outside diameter, fit, seal and housing axial space.
• Clean the shaft, housing and tools before installation; a particle on the raceway or seat can cause noise, overheating or premature failure.
• Do not transmit mounting force through the balls; avoid direct hammer blows, angled loads and pressure on the wrong ring.
• Verify that the shaft and housing follow the fit specified by engineering and that the bearing rotates freely after mounting.
• Confirm lubrication, seals and protection against moisture or dust before equipment start-up.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this ball bearing series 6100/6400/6700/6800/6900, indicating exact reference, quantity, required seal and application to confirm availability and price.