Deep Groove Ball Bearing Series 6000

Deep Groove Ball Bearing Series 6000 is a TECTUL series sheet for quoting single-row deep groove ball bearing references under ISO 15 dimensional standard. It is intended for small motors, ventilation, automation, skates, rollers, light equipment and shafts where radial space is limited and speed is a priority. Selection must not be made only by series number: bore diameter, outside diameter, width, seal or shield type, internal clearance, lubrication, speed, load and operating environment must also be confirmed. The key difference is that this is the most compact option compared with the 6200 and 6300 series, so it must not be replaced by a heavier series without checking the housing and shaft. In this sheet you can quote real series references such as 6015-2RS1, 6017-2Z, 6015-2Z, 608-2RSH and 6001-2RSH, as well as other sizes available by reference. The available lot is quoted by reference, with 95 registered references and an actual bore range d 6-130 mm.

Mounting recommendations

• Confirm internal clearance, seal and lubrication before mounting; in compact bearings, minor misalignment or contamination can shorten service life.
• Clean the shaft, housing and tools before installation; a particle on the raceway or seat can cause noise, overheating or premature failure.
• Do not transmit mounting force through the balls; avoid direct hammer blows, angled loads and pressure on the wrong ring.
• Verify that the shaft and housing follow the fit specified by engineering and that the bearing rotates freely after mounting.
• Confirm lubrication, seals and protection against moisture or dust before equipment start-up.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this series 6000 deep groove ball bearing, indicating exact reference, quantity, required seal and application to confirm availability and price.