Deep Groove Ball Bearing Series 6200

Deep Groove Ball Bearing Series 6200 is a TECTUL series sheet for quoting single-row deep groove ball bearing references under ISO 15 dimensional standard. It is intended for electric motors, fans, pumps, light gearboxes, rollers, auxiliary shafts and power transmission equipment where a balance of radial capacity, speed and availability is required. Selection must not be made only by series number: bore diameter, outside diameter, width, seal or shield type, internal clearance, lubrication, speed, load and operating environment must also be confirmed. The key difference is that compared with the 6000 series it offers a more robust cross-section for the same bore diameter, and compared with the 6300 series it usually takes less radial space. In this sheet you can quote real series references such as 6210-2Z, 6206-2Z, 6207-2Z, 6205-2Z and 6204-2RSH, as well as other sizes available by reference. The available lot is quoted by reference, with 154 registered references and an actual bore range d 5-140 mm.

Mounting recommendations

• Always press on the ring receiving the fit; if it goes onto the shaft, apply force to the inner ring, and if it goes into the housing, to the outer ring.
• Clean the shaft, housing and tools before installation; a particle on the raceway or seat can cause noise, overheating or premature failure.
• Do not transmit mounting force through the balls; avoid direct hammer blows, angled loads and pressure on the wrong ring.
• Verify that the shaft and housing follow the fit specified by engineering and that the bearing rotates freely after mounting.
• Confirm lubrication, seals and protection against moisture or dust before equipment start-up.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this series 6200 deep groove ball bearing, indicating exact reference, quantity, required seal and application to confirm availability and price.