Slotted plastic wiring duct for organizing wiring inside electrical panels, with cover and several cross sections.
Tell us the reference or key specification (current, power, gauge, size), quantity and city — a technical advisor sends your quote the same business day.
Slotted wiring duct organizes wiring inside electrical panels: a rigid PVC channel with UL 94 V-0 flammability rating, side slots for branching conductors and a removable cover. Commercial sections from 25×25 to 100×100 mm, mounted on the panel plate.
Slotted wiring duct for panels is a plastic duct with side slots and cover, designed to organize conductors inside electrical panels, control cabinets, automation, power, switching and distribution enclosures. At TECTUL it is quoted as an industrial line of slotted plastic wiring duct in several cross sections, according to the actual catalog data, to organize outputs to circuit breakers, contactors, relays, terminal blocks, PLCs, power supplies and control equipment. It differs from cable tray because it works inside the enclosure and protects shorter internal wiring routes, while tray supports external runs in plant areas. It also differs from EMT conduit because it is not a rigid raceway for construction work, but a panel organizer with quick access through its cover. Selection should start from the number of conductors, space reserve, outlet radius toward equipment, panel temperature, required finish level and ease of maintenance. Properly sized duct improves wiring readability, reduces unnecessary crossings and speeds technical intervention.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for slotted wiring duct for panels indicating cross section, quantity, city and enclosure type.
| Section (width × height) | Use |
|---|---|
| 25×25 mm · 40×40 mm | Control wiring with few conductors |
| 60×40 mm · 60×60 mm | Standard control panels |
| 80×60 mm · 100×60 mm · 100×100 mm | Power panels and high wiring density |
Rigid PVC duct with UL 94 V-0 rating (self-extinguishing in the vertical test: the specimen goes out within 10 s without flaming drips). Manufacturer guides recommend filling only about 50 % of the duct at commissioning to keep reserve space.
It depends on cross section, quantity and delivery city. TECTUL quotes via WhatsApp without publishing fixed prices for this industrial line.
The actual catalog data indicates slotted plastic wiring duct for panels with cover. Confirm section and quantities when quoting.
Slotted wiring duct organizes wiring inside the panel. Cable tray supports external runs in a plant or building.
Yes, provided the cross section and wiring segregation are defined according to the panel design and operating conditions.
It is measured, cut, deburred, fixed to the enclosure backplate, conductors are routed through the slots and it is closed with the cover without compressing wiring.
Send required cross section, meters or sections, number of panels, delivery city and whether the panel is for control, power or distribution.
It is the most demanding class of the UL 94 vertical flammability test: the material self-extinguishes within 10 s after the flame is removed and drips no flaming particles — a sound requirement inside an electrical panel.
One that leaves initial wiring at about half the channel: manufacturer guides recommend that reserve for future changes and to avoid forcing the cover.
Updated: July 22, 2026
