F-436 Hot-Dip Galvanized Flat Washer Cte Ap. F-436

Hot-dip galvanized ASTM F436 flat washer is a TECTUL reference for use with structural bolts and high-strength assemblies where the project requires a hardened washer according to ASTM F436/F436M. Its function should be read from the washer type: flat washers distribute load and protect the surface, split lock washers help retain tightening, toothed washers bite into the bearing face, and sealing washers work by deformation or compression. In this product the main material is hot-dip galvanized carbon steel and the technical family is ASTM F436. It differs by structural standard and hot-dip galvanizing, not by being a standard commercial flat washer. To quote without errors, report size, quantity, bolt or nut type, working environment, required finish and whether the purchase will be by unit or by kilo. We do not recommend substituting with a similar part if the drawing requires ASTM F436/F436M, 316 stainless steel, a specific gauge, hot-dip galvanized finish or a special reference.

Installation recommendations

• Install it according to the structural assembly drawing, with a clean face and combined with bolts and nuts compatible with the project specification.
• Select the size by the bolt's actual diameter, not only by appearance or by the washer outside diameter.
• Remove burrs, rust, loose paint or dirt from the bearing face before tightening.
• Follow the project specification and do not mix it with bolts or nuts of another class without technical approval.
• Inspect the assembly after initial installation if there is vibration or settling of paint, wood, rubber or thin sheet.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this hot-dip galvanized ASTM F436 flat washer, indicating size, quantity, finish and application to confirm availability and price.